Serving Taos, New Mexico and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Taos, NM

A local list of washer repair companies near Taos, NM, sorted by how closely they match the work, then by distance and public ratings.

Talk to a washing machine tech near Taos
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓6 companies listed for Taos✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Taos and the Taos County area, with companies that mention washer work shown first.

Who Repairs Washers Near Taos

Within 82 miles of Taos there are 6 appliance repair companies in our data. 1 of them are based in Taos itself, and other nearby bases include Ranchos De Taos (2), Las Vegas (1), and Alamosa (1). The farthest listed company is about 82 miles out. Nearest on the list: Sears Appliance Repair, around 0.5 miles out. 1 of them mentions washing machine or washer work in their listing or website. The 5 rated companies in range average 4.2 stars. Because the nearest shops are farther out, ask each company whether Taos is inside its regular service area.

Washer & Dryer Repair
Sears Appliance Repair
1046 Paseo Del Pueblo Sur, Taos, NM 87571
0.5 mi from Taos
★★★★½ 4.3 (13 reviews)
Mentions washersSaturday hours
Appliance Repair
AC Appliance repair
31 Leyba Rd, Ranchos De Taos, NM 87557
3.3 mi from Taos
★★★★½ 4.6 (23 reviews)
Saturday hours
Appliance Repair
NuTech Services LLC..
19 Monte Lindo Rd, Ranchos De Taos, NM 87557
4.0 mi from Taos
Appliance Repair
Georges Appliance Repair/
609 12th St, Las Vegas, NM 87701
58.1 mi from Taos
★★★★★ 4.9 (11 reviews)
Saturday hours
Appliance Repair
Ivan's Appliance and Small Engines Repair
625 West Ave, Alamosa, CO 81101
76.3 mi from Taos
★★★★ 3.8 (14 reviews)
Saturday hours
Appliance Repair
Trinidad Appliance Repair
2704 Freedom Rd, Trinidad, CO 81082
81.9 mi from Taos
★★★½ 3.6 (15 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Taos, NM
Mention a major washer brand0
Distance to the three closest (mi)0.5, 3.3, 4.0
Rated 4.5 stars or higher (10+ reviews)2
Mention washer work1
Listing Saturday hours5
Companies within 82 miles6

The leading options for Taos are Sears Appliance Repair (0.5 miles away, 4.3 stars from 13 reviews, lists Saturday hours); AC Appliance repair (3.3 miles away, based in Ranchos De Taos, 4.6 stars from 23 reviews, lists Saturday hours); NuTech Services LLC.. (4.0 miles away, based in Ranchos De Taos); Georges Appliance Repair/ (58.1 miles away, based in Las Vegas, 4.9 stars from 11 reviews, lists Saturday hours).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Musty or mildew smell from the drum or door seal
  • Water left in the drum after the cycle
  • Washer will not spin, or clothes come out soaking wet
  • Loud banging, shaking or walking during the spin

Why Washing Machines Break Down

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

How a Washer Service Call Usually Goes in Taos

Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with washer not spinning or washer smells like mildew.

If Your Washer Is Leaking

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Taos

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Taos

Most washer calls in Taos come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)

In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.

Questions to Ask a Taos Washer Technician

  • Do you work on front-load and top-load washers, or only one type?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • If a part has to be ordered, how soon can you come back to finish?

Washing Machine Repair FAQs: Taos, NM

Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.

Brand-Specific Washer Repair, Taos

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Taos technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech