Serving Mills River, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Mills River, NC

A local list of washer repair companies near Mills River, NC, sorted by how closely they match the work, then by distance and public ratings.

Water sitting in the washer in Mills River?
Tell us the brand and the problem and we will connect you with a technician near Mills River.
☎(866) 293-4411
✓12 companies listed for Mills River✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. The Mills River list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washing Machine Repair Companies Near Mills River

Within 30 miles of Mills River there are 29 appliance repair companies in our data. The rest are spread across Asheville (10), Hendersonville (5), and Brevard (3). Nearest on the list: Authorized Repair Service, around 5.9 miles out. 5 of them mention washing machine or washer work in their listing or website. Rated companies nearby average 4.5 stars across 29 businesses.

Washer & Dryer Repair
Mr. Appliance of Asheville
96 Fletcher Commercial Dr Unit F, Fletcher, NC 28732
6.2 mi from Mills River
★★★★★ 4.8 (1,708 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1800 4 Seasons Blvd F11, Hendersonville, NC 28792
8.6 mi from Mills River
★★★★½ 4.5 (145 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
352 N Broad St, Brevard, NC 28712
13.2 mi from Mills River
★★★★½ 4.5 (45 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1 S Tunnel Rd, Asheville, NC 28805
14.1 mi from Mills River
★★★★½ 4.5 (193 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1209 Russ Ave, Waynesville, NC 28786
24.6 mi from Mills River
★★★★½ 4.6 (182 reviews)
Mentions washersSaturday hours
Appliance Repair
Haywood Appliance - Asheville Showroom
1378 Hendersonville Rd Ste J, Asheville, NC 28803
10.0 mi from Mills River
★★★★½ 4.6 (268 reviews)
Appliance Repair
AS Appliance Repair
1238 Hendersonville Rd Ste 108, Asheville, NC 28803
10.4 mi from Mills River
★★★★★ 4.8 (43 reviews)
Appliance Repair
Mountain Top Appliance Service
220 Amherst Way, Canton, NC 28716
18.1 mi from Mills River
★★★★½ 4.5 (104 reviews)
Appliance Repair
A-1 Appliance Service
3365 Dellwood Rd, Waynesville, NC 28786
26.3 mi from Mills River
★★★★½ 4.7 (236 reviews)
Appliance Repair
Justice Appliance Repair
42 Spivey Pl, Asheville, NC 28806
15.1 mi from Mills River
★★★★½ 4.4 (71 reviews)
Saturday hours
Appliance Repair
DK Appliance Repair LLC
850 Warren Wilson Rd, Swannanoa, NC 28778
18.0 mi from Mills River
★★★★★ 4.9 (211 reviews)
Saturday hours
Appliance Repair
Authorized Repair Service
3450 Asheville Hwy, Hendersonville, NC 28791
5.9 mi from Mills River
★★★★½ 4.3 (6 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Mills River
With 4.5+ stars and at least 10 reviews17
Mention washer work5
Listing Saturday hours13
Three nearest companies, miles away5.9, 6.2, 6.6
Repair companies inside 30 miles29
Mention a major washer brand0

The leading options for Mills River are Mr. Appliance of Asheville (6.2 miles away, based in Fletcher, 4.8 stars from 1,708 reviews, lists Saturday hours); Sears Appliance Repair (8.6 miles away, based in Hendersonville, 4.5 stars from 145 reviews, lists Saturday hours); Sears Appliance Repair (13.2 miles away, based in Brevard, 4.5 stars from 45 reviews, lists Saturday hours); Sears Appliance Repair (14.1 miles away, based in Asheville, 4.5 stars from 193 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Washer will not spin, or clothes come out soaking wet
  • An error code on the display
  • Loud banging, shaking or walking during the spin
  • Musty or mildew smell from the drum or door seal

The Usual Washer Culprits in Mills River

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

How a Washer Service Call Usually Goes in Mills River

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with washer not spinning or front-load vs top-load washer problems.

Before Anyone Touches the Washer

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Mills River, NC

Most washer calls in Mills River come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

How to Choose a Washing Machine Technician Near Mills River

  • If the washer is leaking, will you find where the water starts before quoting a part?
  • What guarantee do you give on parts and labor?
  • How often do you repair your brand washers, and how quickly can you get parts?

Washing Machine Repair FAQs: Mills River, NC

Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Brand-Specific Washer Repair, Mills River

More Washing Machine Repair Pages Nearby

A clear drain filter, open supply valves and the model number in hand make any washer repair in Mills River faster and cheaper.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech