Serving Archdale, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Archdale, NC

See which appliance repair companies around Archdale work on washing machines, how far away they are and how customers rate them.

Washer down in Archdale?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Archdale✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. The Archdale list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Archdale, NC

40 repair companies serve Archdale from within 30 miles. 1 of them are based in Archdale itself, and the rest are spread across Greensboro (15), High Point (11), and Thomasville (5). The farthest listed company is about 19 miles out. Nearest on the list: Silver Appliance Repair, around 0.9 miles out. Of those, 3 mention washing machine or washer work by name. Across 21 rated companies, the average public rating is 4.5 stars.

Washer & Dryer Repair
Sears Appliance Repair
3200 W Friendly Ave, Greensboro, NC 27408
14.4 mi from Archdale
★★★★½ 4.4 (955 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2455 Lewisville Clemmons Rd, Clemmons, NC 27012
25.2 mi from Archdale
★★★★½ 4.6 (290 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
John Michael & Associates, Inc.
1620 Eastchester Dr #104, High Point, NC 27265
6.9 mi from Archdale
★★★★½ 4.7 (230 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
350 Holly Hill Ln, Burlington, NC 27215
29.1 mi from Archdale
★★★★½ 4.4 (186 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1437 E Dixie Dr, Asheboro, NC 27203
16.9 mi from Archdale
★★★★½ 4.5 (120 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Prime Appliance Repair
615 St George Sq Ct Ste 314, Winston-Salem, NC 27103
23.9 mi from Archdale
★★★★★ 5.0 (8 reviews)
Mentions washers
Appliance Repair
Convenient Appliance Service
317 S Westgate Dr, Greensboro, NC 27407
12.5 mi from Archdale
★★★★★ 4.9 (1,961 reviews)
Appliance Repair
Best Price Appliances
2101- A Patterson St, Greensboro, NC 27407
12.9 mi from Archdale
★★★★½ 4.7 (396 reviews)
Saturday hours
Appliance Repair
Trindale Appliance Repair
506 S Elm St, High Point, NC 27260
4.1 mi from Archdale
★★★★½ 4.4 (109 reviews)
Saturday hours
Appliance Repair
Craddock's Appliance Services
6015 Blazer Rd, Greensboro, NC 27407
5.6 mi from Archdale
★★★★★ 4.9 (44 reviews)
Appliance Repair
Performance Appliances Greensboro
3212 Summit Ave, Greensboro, NC 27405
18.5 mi from Archdale
★★★★½ 4.7 (61 reviews)
Appliance Repair
Best High Point Appliance Repair
1928 College Dr, High Point, NC 27260
3.3 mi from Archdale
★★★★★ 5.0 (1 review)

Companies are shown by relevance and distance from Archdale. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

By the numbers: technicians near Archdale
Distance to the three closest (mi)0.9, 3.3, 4.1
Repair companies inside 30 miles58
Name washers or washing machines in their listing6
Rated 4.5 stars or higher (10+ reviews)13
Mention a major washer brand0
Listing Saturday hours41

At the top of the Archdale list: Sears Appliance Repair (14.4 miles away, based in Greensboro, 4.4 stars from 955 reviews, lists Saturday hours); Sears Appliance Repair (25.2 miles away, based in Clemmons, 4.6 stars from 290 reviews, lists Saturday hours); John Michael & Associates, Inc. (6.9 miles away, based in High Point, 4.7 stars from 230 reviews); Sears Appliance Repair (29.1 miles away, based in Burlington, 4.4 stars from 186 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Archdale
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Burning smell or a motor that hums without turning
  • Washer will not start or the lid or door stays locked
  • Loud banging, shaking or walking during the spin
  • Washer fills slowly, will not fill, or keeps filling

Why Washing Machines Break Down

Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

How a Washer Service Call Usually Goes in Archdale

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Troubleshooting first? Start with front-load vs top-load washer problems or washer smells like mildew.

Before Anyone Touches the Washer

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Archdale, NC

Most washer calls in Archdale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Before You Book in Archdale

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • What guarantee do you give on parts and labor?

Washing Machine Repair FAQs: Archdale, NC

Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Which areas near Archdale do these technicians cover?
The companies on this page are within driving distance of Archdale. Each one sets its own service area, so check the distance shown and confirm your address when you call.

Washer Repair by Brand in Archdale

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Archdale technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech