Serving Canton, Mississippi and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Canton, MS

Washing machine repair from independent technicians serving Canton, with ratings, distances and what to check before you call.

Talk to a washing machine tech near Canton
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Canton✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. The Canton list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Local Washing Machine Repair in Canton, MS

We found 38 appliance repair companies within 30 miles of Canton. The rest are spread across Jackson (20), Brandon (6), and Pearl (4). Distances run up to about 30 miles. Of those, 2 mention washing machine or washer work by name. The closest is Emergency Appliance Repair Services, about 10.5 miles away. The 36 rated companies in range average 4.7 stars.

Washer & Dryer Repair
Mr. Appliance of Madison
137 Executive Dr # C, Madison, MS 39110
11.7 mi from Canton
★★★★½ 4.5 (179 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
381 US-51, Ridgeland, MS 39157
13.7 mi from Canton
★★★★ 4.1 (321 reviews)
Mentions washersSaturday hours
Appliance Repair
Davis Refrigeration and Electrical Inc
5846 N Commerce Plaza SUITE B, Jackson, MS 39206
16.6 mi from Canton
★★★★½ 4.6 (9 reviews)
Appliance Repair
Timber Appliance Repair Professionals
615 Beasley Rd, Jackson, MS 39206
16.7 mi from Canton
★★★★★ 5.0 (2 reviews)
Appliance Repair
Watkins Air & Appliance
1702 Scenic Dr, Brandon, MS 39047
15.3 mi from Canton
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Foxridge Appliance Repair Operations
972 Mayes St, Jackson, MS 39213
19.8 mi from Canton
★★★★★ 5.0 (3 reviews)
Appliance Repair
Clear Horizon Appliance Repair
730 Adkins Blvd, Jackson, MS 39211
16.1 mi from Canton
★★★★★ 5.0 (5 reviews)
Saturday hours
Appliance Repair
Superior Appliance Repair Service
4390 Milwaukee St, Jackson, MS 39209
21.8 mi from Canton
★★★★★ 5.0 (4 reviews)
Saturday hours
Appliance Repair
Quality Appliance Repair
1037 Whitworth St, Jackson, MS 39202
21.4 mi from Canton
★★★★★ 5.0 (4 reviews)
Appliance Repair
Prime Appliance Repair Services
1102 John R. Lynch St, Jackson, MS 39203
23.0 mi from Canton
★★★★★ 5.0 (4 reviews)
Saturday hours
Appliance Repair
Elmcrest Appliance Repair Handlers
402 Riverwind Dr, Pearl, MS 39208
23.6 mi from Canton
★★★★★ 5.0 (2 reviews)
Appliance Repair
Bright Future Appliance Repair
5009 Parkway Dr, Jackson, MS 39211
16.3 mi from Canton
★★★★★ 5.0 (3 reviews)
Saturday hours

Companies are shown by relevance and distance from Canton. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Canton, MS
Three nearest companies, miles away10.5, 10.6, 11.7
Appliance repair companies in range (30 mi)38
Mention a major washer brand0
With 4.5+ stars and at least 10 reviews3
Listing Saturday hours20
Name washers or washing machines in their listing2

First up for Canton: Mr. Appliance of Madison (11.7 miles away, based in Madison, 4.5 stars from 179 reviews); Sears Appliance Repair (13.7 miles away, based in Ridgeland, 4.1 stars from 321 reviews, lists Saturday hours); Davis Refrigeration and Electrical Inc (16.6 miles away, based in Jackson, 4.6 stars from 9 reviews); Timber Appliance Repair Professionals (16.7 miles away, based in Jackson, 5.0 stars from 2 reviews).

⚡ Get connected with a washer technician near Canton
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Grinding or roaring noise that rises with spin speed
  • Water left in the drum after the cycle
  • Washer will not start or the lid or door stays locked
  • Burning smell or a motor that hums without turning

Why Washing Machines Break Down

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.

What a Washing Machine Technician Checks

Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.

Troubleshooting first? Start with washer not filling with water or front-load vs top-load washer problems.

Leaks and Safe Shutoff

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

Avoid installing a washer on carpet or loose plywood, and keep leveling legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Canton

Most washer calls in Canton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications

In Mississippi, you can check a license with the MSBOC Check A License or report a problem to the Mississippi Attorney General's Office, Consumer Protection Division.

Before You Book in Canton

  • What guarantee do you give on parts and labor?
  • How often do you repair your brand washers, and how quickly can you get parts?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Canton, MS

Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
What should I check before calling?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.

Washer Repair by Brand in Canton

More Washing Machine Repair Pages Nearby

Before you call a Canton technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech