Serving Mounds View, Minnesota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Mounds View, MN

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Mounds View.

Need washer repair in Mounds View?
Tell us the brand and the problem and we will connect you with a technician near Mounds View.
☎(866) 293-4411
✓12 companies listed for Mounds View✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. Below are the companies within reach of Mounds View, sorted by how closely they match washing machine work, then by distance and public ratings.

Washer Technicians Serving Mounds View, MN

Our data shows 40 appliance repair companies inside a 30-mile radius of Mounds View. The rest are spread across Minneapolis (10), St Paul (6), and Blaine (5). The closest is TSL Appliance LLC, about 1.0 miles away. 6 list washing machine or washer work specifically. Across 23 rated companies, the average public rating is 4.5 stars.

Washer & Dryer Repair
Omega Force Appliance Repair
393 N Dunlap St Unit 400K, St Paul, MN 55104
11.0 mi from Mounds View
★★★★★ 4.9 (678 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Shortie's Appliances
6922 55th St N, Oakdale, MN 55128
13.0 mi from Mounds View
★★★★½ 4.7 (178 reviews)
Mentions washersSaturday hours
Appliance Repair
Omega Force Appliance Repair
7934 University Ave NE, Fridley, MN 55432
2.8 mi from Mounds View
★★★★½ 4.7 (105 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Super Care Appliance Repair
1547 Livingston Ave #101, West St Paul, MN 55118
15.6 mi from Mounds View
★★★★★ 4.9 (1,075 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
24139 Greenway Rd, Forest Lake, MN 55025
17.5 mi from Mounds View
★★★★½ 4.6 (201 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
12431 Wayzata Blvd, Minnetonka, MN 55305
14.7 mi from Mounds View
★★★★½ 4.4 (217 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
3001 White Bear Ave, Maplewood, MN 55109
10.4 mi from Mounds View
★★★★½ 4.5 (235 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
AMA Appliance Service
101 Shady Oak Rd, Hopkins, MN 55343
16.6 mi from Mounds View
★★★★★ 5.0 (82 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Solutions
16345 MN-65, Ham Lake, MN 55304
11.2 mi from Mounds View
★★★★½ 4.4 (440 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
10 W Lake St, Minneapolis, MN 55408
11.4 mi from Mounds View
★★★★ 4.2 (144 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2000 N E Ct, Bloomington, MN 55425
17.4 mi from Mounds View
★★★★ 4.2 (85 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Repair Inc.
633 E Main St, Anoka, MN 55303
10.5 mi from Mounds View
★★★★ 3.9 (199 reviews)
Mentions washers

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Mounds View repair companies in numbers
Distance to the three closest (mi)1.0, 2.6, 2.7
Mention a major washer brand0
Open on Saturdays (per listing)48
Companies within 30 miles60
With 4.5+ stars and at least 10 reviews20
Mention washer work10

First up for Mounds View: Omega Force Appliance Repair (11.0 miles away, based in St Paul, 4.9 stars from 678 reviews, lists Saturday hours); Shortie's Appliances (13.0 miles away, based in Oakdale, 4.7 stars from 178 reviews, lists Saturday hours); Omega Force Appliance Repair (2.8 miles away, based in Fridley, 4.7 stars from 105 reviews, lists Saturday hours); Super Care Appliance Repair (15.6 miles away, based in West St Paul, 4.9 stars from 1,075 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Mounds View
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer fills slowly, will not fill, or keeps filling
  • Loud banging, shaking or walking during the spin
  • Water left in the drum after the cycle
  • Washer will not spin, or clothes come out soaking wet

The Usual Washer Culprits in Mounds View

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

Inside a Washer Repair Visit

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not spinning or front-load vs top-load washer problems.

If Your Washer Is Leaking

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Before replacing a washer in Mounds View, price the repair. Here is what published cost guides report for common jobs:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Mounds View

Most washer calls in Mounds View come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

Hiring a Washer Repair Company in Mounds View

  • If a part has to be ordered, how soon can you come back to finish?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?

Washing Machine Repair FAQs: Mounds View, MN

Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Brand-Specific Washer Repair, Mounds View

Washing Machine Repair Near Mounds View

A clear drain filter, open supply valves and the model number in hand make any washer repair in Mounds View faster and cheaper.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech