Serving Lake Shore, Maryland and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Lake Shore, MD

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Lake Shore.

Water sitting in the washer in Lake Shore?
Tell us the brand and the problem and we will connect you with a technician near Lake Shore.
☎(866) 293-4411
✓12 companies listed for Lake Shore✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Lake Shore, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Lake Shore list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Local Washing Machine Repair in Lake Shore, MD

40 repair companies serve Lake Shore from within 30 miles. Other nearby bases include Baltimore (13), Glen Burnie (3), and Edgewater (3). The farthest listed company is about 17 miles out. 9 list washing machine or washer work specifically. The closest is Custom Care Appliance Services, about 1.4 miles away. The 37 rated companies in range average 4.3 stars.

Washer & Dryer Repair
Landers Appliance
7032 Golden Ring Rd, Baltimore, MD 21237
15.9 mi from Lake Shore
★★★★★ 4.9 (2,398 reviews)
Mentions washers
Washer & Dryer Repair
Mr. Appliance of Annapolis
1125 West St #200, Annapolis, MD 21401
8.8 mi from Lake Shore
★★★★½ 4.7 (492 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
1040 Annapolis Mall Rd, Annapolis, MD 21401
8.7 mi from Lake Shore
★★★★½ 4.3 (194 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Guys
153 Mayo Rd, Edgewater, MD 21037
12.3 mi from Lake Shore
★★★★½ 4.6 (83 reviews)
Mentions washers
Washer & Dryer Repair
Racz Appliance Repair
3608 Northway Dr, Parkville, MD 21234
17.9 mi from Lake Shore
★★★★½ 4.4 (139 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7900 Ritchie Hwy, Glen Burnie, MD 21061
6.8 mi from Lake Shore
★★★★ 4.2 (908 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
200 Kent Lndg, Stevensville, MD 21666
12.6 mi from Lake Shore
★★★★½ 4.5 (102 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Dr Appliance Repair - Pasadena
8000 Jumpers Hole Rd, Pasadena, MD 21122
5.6 mi from Lake Shore
★★★★★ 5.0 (18 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
15700 Emerald Way, Bowie, MD 20716
17.1 mi from Lake Shore
★★★★½ 4.3 (426 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
S.T.A.R Services Unlimited, LLC
3821 Derby Manor Dr, Baltimore, MD 21215
18.4 mi from Lake Shore
★★★★★ 5.0 (6 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Dr Appliance Repair - Baltimore
3600 Roland Ave, Baltimore, MD 21211
17.6 mi from Lake Shore
Mentions washersSaturday hours
Washer & Dryer Repair
UltraFix Appliance Repair
822 Guilford Ave #2029, Baltimore, MD 21202
15.1 mi from Lake Shore
Mentions washersSaturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Lake Shore repair companies in numbers
Mention washer work14
Appliance repair companies in range (30 mi)60
Mention a major washer brand0
Open on Saturdays (per listing)39
Distance to the three closest (mi)1.4, 3.8, 5.6
Rated 4.5 stars or higher (10+ reviews)20

Closest matches for Lake Shore: Landers Appliance (15.9 miles away, based in Baltimore, 4.9 stars from 2,398 reviews); Mr. Appliance of Annapolis (8.8 miles away, based in Annapolis, 4.7 stars from 492 reviews); Sears Appliance Repair (8.7 miles away, based in Annapolis, 4.3 stars from 194 reviews, lists Saturday hours); Appliance Guys (12.3 miles away, based in Edgewater, 4.6 stars from 83 reviews).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Water on the floor under or in front of the washer
  • Loud banging, shaking or walking during the spin
  • An error code on the display
  • Washer fills slowly, will not fill, or keeps filling

What Usually Goes Wrong

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

How a Washer Service Call Usually Goes in Lake Shore

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not draining or washer not spinning.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Lake Shore, MD

Most washer calls in Lake Shore come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)

In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.

Hiring a Washer Repair Company in Lake Shore

  • Can you give a written estimate before ordering parts?
  • If a part has to be ordered, how soon can you come back to finish?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Lake Shore, MD

Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Brand-Specific Washer Repair, Lake Shore

Washing Machine Repair Near Lake Shore

Before you call a Lake Shore technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech