Serving Gardner, Massachusetts and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Gardner, MA

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Gardner.

Need washer repair in Gardner?
Tell us the brand and the problem and we will connect you with a technician near Gardner.
☎(866) 293-4411
✓12 companies listed for Gardner✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. This page lists independent appliance repair companies serving Gardner and the Worcester County area, with companies that mention washer work shown first.

Washer Technicians Serving Gardner, MA

Within 30 miles of Gardner there are 35 appliance repair companies in our data. Other nearby bases include Worcester (9), Nashua (5), and Marlborough (4). The farthest listed company is about 29 miles out. Tri town Appliance is the nearest, roughly 9.5 miles from Gardner. 9 of them mention washing machine or washer work in their listing or website. Rated companies nearby average 4.3 stars across 28 businesses.

Washer & Dryer Repair
Sears Appliance Repair
100 Commercial Rd, Leominster, MA 01453
13.0 mi from Gardner
★★★★½ 4.6 (121 reviews)
Mentions washersCommercialSaturday hours
Washer & Dryer Repair
Tri town Appliance
510 Mechanic St, Fitchburg, MA 01420
9.5 mi from Gardner
★★★★½ 4.7 (72 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
521 Donald Lynch Blvd, Marlborough, MA 01752
24.7 mi from Gardner
★★★★ 4.2 (401 reviews)
Mentions washersSaturday hours
Appliance Repair
Cluett's
3 Mechanic St, Ware, MA 01082
25.8 mi from Gardner
★★★★½ 4.5 (130 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
310 Daniel Webster Hwy Ste 279, Nashua, NH 03060
29.1 mi from Gardner
★★★★½ 4.5 (185 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
252 Main St, Acton, MA 01720
28.1 mi from Gardner
★★★★ 4.2 (100 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
D&D Appliance Gurus
68 Chatanika Ave, Worcester, MA 01602
21.7 mi from Gardner
★★★★½ 4.6 (9 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Giddy Up's Appliance Repair & Refrigeration
3 Tetreau St, Nashua, NH 03060
29.2 mi from Gardner
★★★★½ 4.7 (49 reviews)
Mentions washers
Washer & Dryer Repair
Common Appliance Repair LLC
189 Brigham Hill Rd, North Grafton, MA 01536
28.6 mi from Gardner
★★★★★ 5.0 (17 reviews)
Mentions washersSaturday hours
Appliance Repair
Certified Appliance Care
364 Boston Tpke Ste 1C, Shrewsbury, MA 01545
25.0 mi from Gardner
★★★★½ 4.7 (80 reviews)
Appliance Repair
S & S Appliance
447 Main St, Athol, MA 01331
12.4 mi from Gardner
★★★★½ 4.6 (70 reviews)
Saturday hours
Appliance Repair
Harrity Appliance
330 W Boylston St, Worcester, MA 01606
21.7 mi from Gardner
★★★★½ 4.4 (50 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Gardner
Distance to the three closest (mi)9.5, 12.1, 12.4
Name washers or washing machines in their listing9
Open on Saturdays (per listing)26
With 4.5+ stars and at least 10 reviews13
Repair companies inside 30 miles35
Mention a major washer brand0

Closest matches for Gardner: Sears Appliance Repair (13.0 miles away, based in Leominster, 4.6 stars from 121 reviews, lists Saturday hours); Tri town Appliance (9.5 miles away, based in Fitchburg, 4.7 stars from 72 reviews); Sears Appliance Repair (24.7 miles away, based in Marlborough, 4.2 stars from 401 reviews, lists Saturday hours); Cluett's (25.8 miles away, based in Ware, 4.5 stars from 130 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Gardner
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Burning smell or a motor that hums without turning
  • Grinding or roaring noise that rises with spin speed
  • Washer will not start or the lid or door stays locked
  • An error code on the display

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

What Gets Fixed on a Gardner Washer Call

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

Water, Power and Safety First

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Gardner

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Gardner

Most washer calls in Gardner come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Massachusetts does not issue a separate appliance repair license; running fuel gas piping to appliances and installing their vent piping is gas fitting work that requires a license from the Board of State Examiners of Plumbers and Gas Fitters. Source: Plumbers and gas fitters consumer fact sheet (Mass.gov)

In Massachusetts, you can check a license with the Massachusetts Division of Occupational Licensure eLIPSE license verification portal or report a problem to the Massachusetts Attorney General's Office, Consumer Advocacy and Response Division.

Hiring a Washer Repair Company in Gardner

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Gardner, MA

How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Brand-Specific Washer Repair, Gardner

Washing Machine Repair Near Gardner

Before you call a Gardner technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech