Serving Beverly, Massachusetts and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Beverly, MA

A local list of washer repair companies near Beverly, MA, sorted by how closely they match the work, then by distance and public ratings.

Water sitting in the washer in Beverly?
Tell us the brand and the problem and we will connect you with a technician near Beverly.
☎(866) 293-4411
✓12 companies listed for Beverly✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Beverly, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Beverly list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Local Washing Machine Repair in Beverly, MA

40 repair companies serve Beverly from within 30 miles. 2 list an address in Beverly, and other nearby bases include Peabody (5), Lynn (5), and Revere (5). The closest is Mr. Appliance of Salem, about 1.3 miles away. Of those, 11 mention washing machine or washer work by name. Across 37 rated companies, the average public rating is 4.5 stars.

Washer & Dryer Repair
Mr. Appliance of Salem
100 Cummings Center Ste 429A, Beverly, MA 01915
1.3 mi from Beverly
★★★★½ 4.6 (416 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
iPlushop Appliance Sales, Repair & Home Service
474 Lowell St, Peabody, MA 01960
5.9 mi from Beverly
★★★★★ 5.0 (75 reviews)
Mentions washers
Washer & Dryer Repair
Fasteny Appliance Repair LLC
656 Ocean Ave Apt 621, Revere, MA 02151
12.3 mi from Beverly
★★★★★ 4.9 (392 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Master of Appliances Repair
67 Maplewood St Unit 112, Malden, MA 02148
13.3 mi from Beverly
★★★★★ 4.9 (288 reviews)
Mentions washers
Washer & Dryer Repair
Greg Rogers Co
101 Western Ave, Lynn, MA 01904
7.3 mi from Beverly
★★★★½ 4.6 (48 reviews)
Mentions washers
Washer & Dryer Repair
Boston & Cambridge Appliance Repair, Inc.
271 Main St Ste 305a, Stoneham, MA 02180
13.4 mi from Beverly
★★★★½ 4.3 (56 reviews)
Mentions washersCommercialSaturday hours
Washer & Dryer Repair
Salam Appliance Repair
27 Salem St, Salem, MA 01970
3.9 mi from Beverly
★★★★½ 4.3 (18 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Home Appliance Repair Revere
1120 N Shore Rd #83, Revere, MA 02151
12.3 mi from Beverly
★★★★★ 5.0 (1 review)
Mentions washers
Washer & Dryer Repair
Melrose Appliance Repair
476 Main St #85, Melrose, MA 02176
13.0 mi from Beverly
★★★★★ 5.0 (1 review)
Mentions washersSaturday hours
Washer & Dryer Repair
United Lynn Appliance Repair
109 Central Ave #101, Lynn, MA 01901
8.4 mi from Beverly
★★★★ 4.0 (7 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
ATE Service LLC
81 Beachland Ave, Revere, MA 02151
12.3 mi from Beverly
★★★★ 4.1 (14 reviews)
Mentions washers
Appliance Repair
A & M Appliance
1000 Osgood St, North Andover, MA 01845
16.5 mi from Beverly
★★★★ 3.9 (29 reviews)
Mentions washersSaturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Beverly
Distance to the three closest (mi)1.3, 2.4, 3.9
Open on Saturdays (per listing)43
Rated 4.5 stars or higher (10+ reviews)26
Mention a major washer brand1
Mention washer work17
Appliance repair companies in range (30 mi)60

The leading options for Beverly are Mr. Appliance of Salem (1.3 miles away, 4.6 stars from 416 reviews, lists Saturday hours); iPlushop Appliance Sales, Repair & Home Service (5.9 miles away, based in Peabody, 5.0 stars from 75 reviews); Fasteny Appliance Repair LLC (12.3 miles away, based in Revere, 4.9 stars from 392 reviews, lists Saturday hours); Master of Appliances Repair (13.3 miles away, based in Malden, 4.9 stars from 288 reviews).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer fills slowly, will not fill, or keeps filling
  • Grinding or roaring noise that rises with spin speed
  • Musty or mildew smell from the drum or door seal
  • An error code on the display

What Usually Goes Wrong

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

How a Washer Service Call Usually Goes in Beverly

Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.

Troubleshooting first? Start with washer not draining or washer not spinning.

Water, Power and Safety First

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Beverly

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Beverly

Most washer calls in Beverly come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Massachusetts does not issue a separate appliance repair license; running fuel gas piping to appliances and installing their vent piping is gas fitting work that requires a license from the Board of State Examiners of Plumbers and Gas Fitters. Source: Plumbers and gas fitters consumer fact sheet (Mass.gov)

In Massachusetts, you can check a license with the Massachusetts Division of Occupational Licensure eLIPSE license verification portal or report a problem to the Massachusetts Attorney General's Office, Consumer Advocacy and Response Division.

Hiring a Washer Repair Company in Beverly

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Beverly, MA

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.

Washer Repair by Brand in Beverly

Washing Machine Repair Near Beverly

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Beverly technician a trip for parts.

Get connected with a washer technician near Beverly
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech