Serving Newton, Iowa and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Newton, IA

See which appliance repair companies around Newton work on washing machines, how far away they are and how customers rate them.

Water sitting in the washer in Newton?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Newton✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. Below are the companies within reach of Newton, sorted by how closely they match washing machine work, then by distance and public ratings.

Washing Machine Repair Companies Near Newton

14 repair companies serve Newton from within 30 miles. 2 of them are based in Newton itself, and the rest are spread across Des Moines (6), Ankeny (2), and Grinnell (1). Distances run up to about 30 miles. Budget Repair is the nearest, roughly 0.6 miles from Newton. 2 of them mention washing machine or washer work in their listing or website. Across 13 rated companies, the average public rating is 4.6 stars.

Washer & Dryer Repair
Sears Appliance Repair
2535 Hubbell Ave, Des Moines, IA 50317
27.9 mi from Newton
★★★★½ 4.4 (117 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1720 S Center St, Marshalltown, IA 50158
23.7 mi from Newton
★★★★½ 4.6 (48 reviews)
Mentions washersSaturday hours
Appliance Repair
Budget Repair
408 N 4th Ave E, Newton, IA 50208
0.6 mi from Newton
★★★★½ 4.6 (32 reviews)
Appliance Repair
Service Guard
110 N 4th Ave W #3141, Newton, IA 50208
0.9 mi from Newton
Saturday hours
Appliance Repair
Metro Appliance Repair
2905 Delaware Ave, Des Moines, IA 50317
28.4 mi from Newton
★★★★½ 4.7 (613 reviews)
Saturday hours
Appliance Repair
Ware Appliance
405 SW 3rd St, Ankeny, IA 50023
29.2 mi from Newton
★★★★½ 4.3 (47 reviews)
Saturday hours
Appliance Repair
Everett Appliance Repair Services
1400 Maple St, Des Moines, IA 50316
29.7 mi from Newton
★★★★★ 5.0 (5 reviews)
Saturday hours
Appliance Repair
Nolan Appliance Repair Solutions
2104 E 14th St, Des Moines, IA 50316
29.5 mi from Newton
★★★★★ 5.0 (3 reviews)
Saturday hours
Appliance Repair
Mike's Appliance Repair
2783 Knapp Ave, Melbourne, IA 50162
17.5 mi from Newton
★★★★½ 4.7 (3 reviews)
Saturday hours
Appliance Repair
Pioneer Appliance Repair Experts
1725 Hull Ave, Des Moines, IA 50313
28.9 mi from Newton
★★★★★ 5.0 (5 reviews)
Saturday hours
Appliance Repair
Starnes TV & Appliance
95 6th Ave, Grinnell, IA 50112
16.0 mi from Newton
★★★★ 3.8 (40 reviews)
Saturday hours
Appliance Repair
Pat's Rebuilt Appliances & Services
4830 NE 30th St, Des Moines, IA 50317
27.0 mi from Newton
★★★★ 4.2 (5 reviews)
Saturday hours

Companies are shown by relevance and distance from Newton. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Newton, IA
Three nearest companies, miles away0.6, 0.9, 16.0
Listing Saturday hours12
Mention a major washer brand0
Name washers or washing machines in their listing2
Rated 4.5 stars or higher (10+ reviews)3
Repair companies inside 30 miles14

The leading options for Newton are Sears Appliance Repair (27.9 miles away, based in Des Moines, 4.4 stars from 117 reviews, lists Saturday hours); Sears Appliance Repair (23.7 miles away, based in Marshalltown, 4.6 stars from 48 reviews, lists Saturday hours); Budget Repair (0.6 miles away, 4.6 stars from 32 reviews); Service Guard (0.9 miles away, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Washer fills slowly, will not fill, or keeps filling
  • Burning smell or a motor that hums without turning
  • Washer will not start or the lid or door stays locked
  • Water left in the drum after the cycle

The Usual Washer Culprits in Newton

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

What Gets Fixed on a Newton Washer Call

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with washer not filling with water or washer smells like mildew.

Before Anyone Touches the Washer

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Do not let children play in, on or with a washer, and remove the lid or door before a washer is discarded or taken out of service so a child cannot become trapped inside. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Repair or Replace Your Washer?

Before replacing a washer in Newton, price the repair. Here is what published cost guides report for common jobs:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Newton Owners Should Know

Most washer calls in Newton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors

In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.

Before You Book in Newton

  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?
  • How often do you repair your brand washers, and how quickly can you get parts?

Washing Machine Repair FAQs: Newton, IA

Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Brand-Specific Washer Repair, Newton

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Newton technician a trip for parts.

Get connected with a washer technician near Newton
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech