Serving Fort Dodge, Iowa and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Fort Dodge, IA

See which appliance repair companies around Fort Dodge work on washing machines, how far away they are and how customers rate them.

Need washer repair in Fort Dodge?
Tell us the brand and the problem and we will connect you with a technician near Fort Dodge.
☎(866) 293-4411
✓7 companies listed for Fort Dodge✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Fort Dodge, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Fort Dodge list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washing Machine Repair Companies Near Fort Dodge

Our data shows 7 appliance repair companies inside a 60-mile radius of Fort Dodge. The rest are spread across Algona (2), Webster City (1), and Ames (1). Sears Appliance Repair is the nearest, roughly 18.6 miles from Fort Dodge. 4 list washing machine or washer work specifically. Across 7 rated companies, the average public rating is 4.4 stars. Fort Dodge is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
2307 Superior St, Webster City, IA 50595
18.6 mi from Fort Dodge
★★★★½ 4.6 (38 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
715 US-30, Carroll, IA 51401
47.1 mi from Fort Dodge
★★★★★ 4.8 (25 reviews)
Mentions LG, Samsung, WhirlpoolMentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1501 US-169, Algona, IA 50511
39.6 mi from Fort Dodge
★★★★½ 4.4 (15 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Ken's Appliance & Services LLC
230 Washington Ave, Ames, IA 50010
44.3 mi from Fort Dodge
★★★★ 4.0 (90 reviews)
Mentions washersSaturday hours
Appliance Repair
Melander's Appliance and Bedding
1233 N Lake Ave, Storm Lake, IA 50588
53.1 mi from Fort Dodge
★★★★½ 4.6 (25 reviews)
Saturday hours
Appliance Repair
Algona Appliance
310 E State St, Algona, IA 50511
38.7 mi from Fort Dodge
★★★½ 3.6 (7 reviews)
Saturday hours
Appliance Repair
Kevy's Appliance Repair
10 5th Ave NE, Hampton, IA 50441
51.8 mi from Fort Dodge
★★★★★ 5.0 (2 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Fort Dodge repair companies in numbers
Mention a major washer brand1
Three nearest companies, miles away18.6, 38.7, 39.6
Companies within 60 miles7
Mention washer work4
Open on Saturdays (per listing)6
With 4.5+ stars and at least 10 reviews3

Closest matches for Fort Dodge: Sears Appliance Repair (18.6 miles away, based in Webster City, 4.6 stars from 38 reviews, lists Saturday hours); Sears Appliance Repair (47.1 miles away, based in Carroll, 4.8 stars from 25 reviews, lists Saturday hours); Sears Appliance Repair (39.6 miles away, based in Algona, 4.4 stars from 15 reviews, lists Saturday hours); Ken's Appliance & Services LLC (44.3 miles away, based in Ames, 4.0 stars from 90 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Fort Dodge
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer will not start or the lid or door stays locked
  • Water on the floor under or in front of the washer
  • Washer fills slowly, will not fill, or keeps filling
  • An error code on the display

Why Washing Machines Break Down

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

Inside a Washer Repair Visit

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Repair or Replace Your Washer?

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Fort Dodge, IA

Most washer calls in Fort Dodge come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors

In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.

How to Choose a Washing Machine Technician Near Fort Dodge

  • Can you give a written estimate before ordering parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Will you check the drain pump filter and drain hose before replacing the pump?

Washing Machine Repair FAQs: Fort Dodge, IA

How much does washing machine repair cost in Fort Dodge?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Brand-Specific Washer Repair, Fort Dodge

More Washing Machine Repair Pages Nearby

Before you call a Fort Dodge technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech