Serving Pooler, Georgia and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Pooler, GA

See which appliance repair companies around Pooler work on washing machines, how far away they are and how customers rate them.

Washer down in Pooler?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Pooler✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washer Technicians Serving Pooler, GA

We found 22 appliance repair companies within 30 miles of Pooler. Other nearby bases include Savannah (12), Ridgeland (2), and Hinesville (2). Of those, 4 mention washing machine or washer work by name. The closest is Sammy’s Appliance LLC, about 5.0 miles away. Across 19 rated companies, the average public rating is 4.5 stars.

Washer & Dryer Repair
Advanced Appliance Services
145 Bodaford Rd, Richmond Hill, GA 31324
18.3 mi from Pooler
★★★★½ 4.3 (94 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
7810 Abercorn St, Savannah, GA 31406
10.7 mi from Pooler
★★★★ 3.8 (116 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Griffin Appliance Repair LLC
5 Brandle Cove, Savannah, GA 31405
7.6 mi from Pooler
★★★½ 3.7 (3 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1555 Fording Island Rd, Hilton Head Island, SC 29926
27.9 mi from Pooler
★★★★ 4.2 (20 reviews)
Mentions washersSaturday hours
Appliance Repair
Repliance Pro
785 H King George Blvd Ste. 1129, Savannah, GA 31419
8.4 mi from Pooler
★★★★½ 4.7 (58 reviews)
Appliance Repair
Operation Comfort Control, LLC
100 Bull St, Savannah, GA 31401
9.8 mi from Pooler
★★★★★ 4.9 (33 reviews)
Saturday hours
Appliance Repair
All About Appliance Repairs
80 Creekside Cir, Ellabell, GA 31308
15.2 mi from Pooler
★★★★½ 4.7 (40 reviews)
Saturday hours
Appliance Repair
Hobart Service
1335 Lynah Ave Ste 108, Garden City, GA 31408
5.8 mi from Pooler
★★★★ 3.9 (10 reviews)
Appliance Repair
Tiger Tech Pro LLC
13051 Abercorn St Ste. b3-645, Savannah, GA 31419
10.0 mi from Pooler
★★★★½ 4.6 (9 reviews)
Appliance Repair
Quality Appliance
11202 White Bluff Rd, Savannah, GA 31419
11.2 mi from Pooler
★★★★½ 4.7 (21 reviews)
Saturday hours
Appliance Repair
Sammy’s Appliance LLC
4511 Old Louisville Rd Apt 16, Savannah, GA 31408
5.0 mi from Pooler
★★★★★ 5.0 (1 review)
Appliance Repair
Kelly Appliance Repairs
1305 Barnard St, Savannah, GA 31401
9.6 mi from Pooler
★★★★ 4.0 (15 reviews)

Companies are shown by relevance and distance from Pooler. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Pooler, GA
Listing Saturday hours11
Mention washer work4
Distance to the three closest (mi)5.0, 5.8, 7.6
Rated 4.5 stars or higher (10+ reviews)7
Mention a major washer brand0
Appliance repair companies in range (30 mi)22

First up for Pooler: Advanced Appliance Services (18.3 miles away, based in Richmond Hill, 4.3 stars from 94 reviews); Sears Appliance Repair (10.7 miles away, based in Savannah, 3.8 stars from 116 reviews, lists Saturday hours); Griffin Appliance Repair LLC (7.6 miles away, based in Savannah, 3.7 stars from 3 reviews, lists Saturday hours); Sears Appliance Repair (27.9 miles away, based in Hilton Head Island, 4.2 stars from 20 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Water on the floor under or in front of the washer
  • Washer will not start or the lid or door stays locked
  • An error code on the display
  • Grinding or roaring noise that rises with spin speed

What Usually Goes Wrong

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

Inside a Washer Repair Visit

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with washer smells like mildew or washer not spinning.

Water, Power and Safety First

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Pooler Owners Should Know

Most washer calls in Pooler come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)

In Georgia, you can check a license with the Georgia Secretary of State Licensing Division License Lookup or report a problem to the Georgia Attorney General's Consumer Protection Division.

Questions to Ask a Pooler Washer Technician

  • Do you work on front-load and top-load washers, or only one type?
  • What guarantee do you give on parts and labor?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Pooler, GA

Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Brand-Specific Washer Repair, Pooler

Washing Machine Repair in Nearby Cities

A clear drain filter, open supply valves and the model number in hand make any washer repair in Pooler faster and cheaper.

Get connected with a washer technician near Pooler
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech