Serving Cleveland, Georgia and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Cleveland, GA

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Cleveland.

Water sitting in the washer in Cleveland?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Cleveland✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. Below are the companies within reach of Cleveland, sorted by how closely they match washing machine work, then by distance and public ratings.

Local Washing Machine Repair in Cleveland, GA

We found 14 appliance repair companies within 30 miles of Cleveland. 1 list an address in Cleveland, and other nearby bases include Gainesville (4), Blairsville (2), and Baldwin (1). The farthest listed company is about 29 miles out. The closest is Aircon Refrigeration & Applnc, about 3.5 miles away. Of those, 3 mention washing machine or washer work by name. The 14 rated companies in range average 4.6 stars.

Washer & Dryer Repair
Sears Appliance Repair
60 Sears Wy, Blairsville, GA 30512
21.9 mi from Cleveland
★★★★★ 4.8 (143 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
150 Pearl Nix Pkwy, Gainesville, GA 30501
21.5 mi from Cleveland
★★★★½ 4.4 (121 reviews)
Mentions washersSaturday hours
Appliance Repair
Smith Appliance Services
1130 Park Ave #2108, Baldwin, GA 30511
14.7 mi from Cleveland
★★★ 3.2 (18 reviews)
Mentions washersSaturday hours
Appliance Repair
Aircon Refrigeration & Applnc
382 Shuler Rd, Cleveland, GA 30528
3.5 mi from Cleveland
★★★★½ 4.3 (22 reviews)
Appliance Repair
Peachtree Appliance Repair
Roy Parks Rd, Gainesville, GA 30507
25.1 mi from Cleveland
★★★★★ 4.9 (99 reviews)
Appliance Repair
Good Hands Appliance Repair
5835 Stargazer Way, Cumming, GA 30028
26.3 mi from Cleveland
★★★★★ 4.9 (99 reviews)
Saturday hours
Appliance Repair
Integrity Appliance Service
3701 McEver Rd, Oakwood, GA 30566
24.3 mi from Cleveland
★★★★½ 4.6 (120 reviews)
Appliance Repair
All Day Appliance Services
6482 Narramore Way, Lula, GA 30554
14.8 mi from Cleveland
★★★★½ 4.4 (37 reviews)
Appliance Repair
united service pros
6122 Timberidge Dr, Gainesville, GA 30506
18.6 mi from Cleveland
★★★★★ 5.0 (8 reviews)
Saturday hours
Appliance Repair
Archer Appliance Repair
83 Fowlertown Rd, Toccoa, GA 30577
25.0 mi from Cleveland
★★★★½ 4.4 (43 reviews)
Saturday hours
Appliance Repair
Appliance Tech Pros & Refrigeration Repair
5951 Screech Owl Dr, Flowery Branch, GA 30542
29.5 mi from Cleveland
★★★★★ 4.9 (465 reviews)
Saturday hours
Appliance Repair
Deal's Appliance Service Inc.
5418 Hwy 441, Wiley, GA 30581
24.0 mi from Cleveland
★★★★★ 4.8 (99 reviews)

Companies are shown by relevance and distance from Cleveland. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Cleveland repair companies in numbers
Listing Saturday hours8
Companies within 30 miles14
Mention a major washer brand0
Distance to the three closest (mi)3.5, 12.5, 14.7
Mention washer work3
With 4.5+ stars and at least 10 reviews7

First up for Cleveland: Sears Appliance Repair (21.9 miles away, based in Blairsville, 4.8 stars from 143 reviews, lists Saturday hours); Sears Appliance Repair (21.5 miles away, based in Gainesville, 4.4 stars from 121 reviews, lists Saturday hours); Smith Appliance Services (14.7 miles away, based in Baldwin, 3.2 stars from 18 reviews, lists Saturday hours); Aircon Refrigeration & Applnc (3.5 miles away, 4.3 stars from 22 reviews).

⚡ Get connected with a washer technician near Cleveland
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer fills slowly, will not fill, or keeps filling
  • Musty or mildew smell from the drum or door seal
  • Washer will not start or the lid or door stays locked
  • An error code on the display

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

What a Washing Machine Technician Checks

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

Water, Power and Safety First

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Before replacing a washer in Cleveland, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Cleveland, GA

Most washer calls in Cleveland come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)

In Georgia, you can check a license with the Georgia Secretary of State Licensing Division License Lookup or report a problem to the Georgia Attorney General's Consumer Protection Division.

Hiring a Washer Repair Company in Cleveland

  • If the washer is leaking, will you find where the water starts before quoting a part?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Cleveland, GA

Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
What should I check before calling?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Washer Repair by Brand in Cleveland

Washing Machine Repair Near Cleveland

Before you call a Cleveland technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech