Serving Brush, Colorado and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Brush, CO

Washing machine repair from independent technicians serving Brush, with ratings, distances and what to check before you call.

Need washer repair in Brush?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓5 companies listed for Brush✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. The Brush list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Brush, CO

5 repair companies serve Brush from within 60 miles. Other nearby bases include Sterling (2), Greeley (2), and Bennett (1). The closest is The Appliance Guys llc, about 32.4 miles away. Of those, 3 mention washing machine or washer work by name. Across 5 rated companies, the average public rating is 2.9 stars. Brush is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Appliance repair center
675 2nd St, Bennett, CO 80102
54.6 mi from Brush
★★★★½ 4.6 (36 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
130 Broadway St, Sterling, CO 80751
34.4 mi from Brush
★★½ 2.6 (5 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2800 Greeley Mall, Greeley, CO 80631
57.6 mi from Brush
★ 1.0 (6 reviews)
Mentions washersSaturday hours
Appliance Repair
The Appliance Guys llc
1119 Westview Ct, Sterling, CO 80751
32.4 mi from Brush
★★★½ 3.4 (15 reviews)
Appliance Repair
Hispano Maintenance
815 10th St, Greeley, CO 80631
56.9 mi from Brush
★★★ 3.0 (40 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Brush, CO
With 4.5+ stars and at least 10 reviews1
Name washers or washing machines in their listing3
Three nearest companies, miles away32.4, 34.4, 54.6
Mention a major washer brand0
Listing Saturday hours4
Repair companies inside 60 miles5

Closest matches for Brush: Appliance repair center (54.6 miles away, based in Bennett, 4.6 stars from 36 reviews, lists Saturday hours); Sears Appliance Repair (34.4 miles away, based in Sterling, 2.6 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (57.6 miles away, based in Greeley, 1.0 stars from 6 reviews, lists Saturday hours); The Appliance Guys llc (32.4 miles away, based in Sterling, 3.4 stars from 15 reviews).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

When to Call for Washer Repair

  • Washer fills slowly, will not fill, or keeps filling
  • Washer will not start or the lid or door stays locked
  • Water left in the drum after the cycle
  • Washer will not spin, or clothes come out soaking wet

The Usual Washer Culprits in Brush

Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

What a Washing Machine Technician Checks

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with washer not filling with water or washer not spinning.

Leaks and Safe Shutoff

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Brush

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Brush Owners Should Know

Most washer calls in Brush come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)

In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.

How to Choose a Washing Machine Technician Near Brush

  • Can you give a written estimate before ordering parts?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • What guarantee do you give on parts and labor?

Washing Machine Repair FAQs: Brush, CO

Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Brand-Specific Washer Repair, Brush

Washing Machine Repair Near Brush

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Brush technician a trip for parts.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech