Serving Tara Hills, California and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Tara Hills, CA

A local list of washer repair companies near Tara Hills, CA, sorted by how closely they match the work, then by distance and public ratings.

Water sitting in the washer in Tara Hills?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Tara Hills✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Who Repairs Washers Near Tara Hills

40 repair companies serve Tara Hills from within 30 miles. The rest are spread across Vallejo (10), Richmond (8), and Berkeley (8). Distances run up to about 9 miles. Of those, 3 mention washing machine or washer work by name. Sears Appliance Repair is the nearest, roughly 1.0 miles from Tara Hills. Across 20 rated companies, the average public rating is 4.8 stars.

Washer & Dryer Repair
Sears Appliance Repair
2300 Hilltop Mall Rd, Richmond, CA 94806
1.0 mi from Tara Hills
★★★★½ 4.6 (489 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
FixWell Appliance Repair
888 4th St #18, San Rafael, CA 94901
11.4 mi from Tara Hills
★★★★★ 4.9 (100 reviews)
Mentions washers
Washer & Dryer Repair
ServiceON Appliance Repair & Services
70 Doray Dr, Pleasant Hill, CA 94523
14.3 mi from Tara Hills
★★★★★ 4.8 (70 reviews)
Mentions washers
Washer & Dryer Repair
Zuta Appliance Repair
2081 Center St #156, Berkeley, CA 94704
9.0 mi from Tara Hills
★★★★★ 4.8 (186 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Fast Help Appliance Repair
2081 Center St, Berkeley, CA 94704
9.0 mi from Tara Hills
★★★★★ 5.0 (18 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Marin County Appliance Repair by Hi-Tech
28 Schmidt Ln, San Rafael, CA 94903
11.1 mi from Tara Hills
★★★★★ 4.9 (19 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
UniFix Appliance Repair
1000 4th St Ste 300, San Rafael, CA 94901
11.5 mi from Tara Hills
★★★★★ 4.9 (94 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Urban Appliance Repair LLC
3801 San Pablo Ave, Emeryville, CA 94608
11.6 mi from Tara Hills
★★★★★ 5.0 (54 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1001 Sunvalley Blvd, Concord, CA 94520
14.2 mi from Tara Hills
★★★★½ 4.3 (540 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Prime Fix Appliances Repair
125 Camino Alto CA e1, Mill Valley, CA 94941
13.3 mi from Tara Hills
★★★★★ 5.0 (8 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance King
64 Duran Dr, San Rafael, CA 94903
13.8 mi from Tara Hills
★★★★½ 4.6 (20 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Repair
779 Kingston Ave Apt 6, Piedmont, CA 94611
12.3 mi from Tara Hills
★★★★ 3.8 (4 reviews)
Mentions washersSaturday hours

Companies are shown by relevance and distance from Tara Hills. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Tara Hills repair companies in numbers
Mention a major washer brand0
Listing Saturday hours41
Companies within 30 miles60
Rated 4.5 stars or higher (10+ reviews)11
Distance to the three closest (mi)1.0, 1.1, 1.5
Name washers or washing machines in their listing6

At the top of the Tara Hills list: Sears Appliance Repair (1.0 miles away, based in Richmond, 4.6 stars from 489 reviews, lists Saturday hours); FixWell Appliance Repair (11.4 miles away, based in San Rafael, 4.9 stars from 100 reviews); ServiceON Appliance Repair & Services (14.3 miles away, based in Pleasant Hill, 4.8 stars from 70 reviews); Zuta Appliance Repair (9.0 miles away, based in Berkeley, 4.8 stars from 186 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Tara Hills
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Grinding or roaring noise that rises with spin speed
  • Washer will not start or the lid or door stays locked
  • Musty or mildew smell from the drum or door seal
  • Burning smell or a motor that hums without turning

Why Washing Machines Break Down

Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

What a Washing Machine Technician Checks

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not spinning.

If Your Washer Is Leaking

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Tara Hills

Most washer calls in Tara Hills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services

In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).

Questions to Ask a Tara Hills Washer Technician

  • What guarantee do you give on parts and labor?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Tara Hills, CA

Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Washer Repair by Brand in Tara Hills

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Tara Hills technician a trip for parts.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech