Serving Bear Valley Springs, California and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Bear Valley Springs, CA

Washing machine repair from independent technicians serving Bear Valley Springs, with ratings, distances and what to check before you call.

Talk to a washing machine tech near Bear Valley Springs
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Bear Valley Springs✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. The Bear Valley Springs list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Who Repairs Washers Near Bear Valley Springs

We found 40 appliance repair companies within 30 miles of Bear Valley Springs. The rest are spread across Bakersfield (36), Tehachapi (1), and Arvin (1). Art's Appliance Service is the nearest, roughly 3.7 miles from Bear Valley Springs. 2 list washing machine or washer work specifically. Rated companies nearby average 4.5 stars across 27 businesses.

Washer & Dryer Repair
Sears Appliance Repair
3001 Ming Ave, Bakersfield, CA 93304
24.6 mi from Bear Valley Springs
★★★★½ 4.4 (295 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Bakersfield Area Appliance Repair
2032 17th St, Bakersfield, CA 93301
25.4 mi from Bear Valley Springs
★★★★★ 5.0 (1 review)
Mentions washers
Appliance Repair
Appliance Repair Specialist
238 E Norris Rd, Bakersfield, CA 93308
26.7 mi from Bear Valley Springs
★★★★½ 4.6 (4,635 reviews)
Appliance Repair
Zip Appliance & Plumbing Repair
4040 Easton Dr 4 Suite 100, Bakersfield, CA 93309
26.4 mi from Bear Valley Springs
★★★★★ 4.8 (1,299 reviews)
Saturday hours
Appliance Repair
Montenegro Appliances
917 Chester Ave, Bakersfield, CA 93301
24.8 mi from Bear Valley Springs
★★★★½ 4.3 (34 reviews)
Saturday hours
Appliance Repair
Quality Appliance Repair Services
201 Galaxy Ave, Bakersfield, CA 93308
27.4 mi from Bear Valley Springs
★★★★★ 4.8 (72 reviews)
Appliance Repair
Art's Appliance Service
21301 Yearling Pl, Tehachapi, CA 93561
3.7 mi from Bear Valley Springs
★★★½ 3.7 (3 reviews)
Appliance Repair
PAT-RIOT HEATING & AC REPAIR SERVICE BAKERSFIELD
8021 Mills Dr, Bakersfield, CA 93306
19.8 mi from Bear Valley Springs
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Rafa’s Appliances
9909 Main St, Lamont, CA 93241
16.3 mi from Bear Valley Springs
★★★½ 3.6 (5 reviews)
Saturday hours
Appliance Repair
Westchester Appliance Repair Service
1350 Easton Dr, Bakersfield, CA 93309
26.1 mi from Bear Valley Springs
★★★★★ 5.0 (3 reviews)
Saturday hours
Appliance Repair
Matrix Appliance System Repair
2900 Calloway Dr, Bakersfield, CA 93312
29.9 mi from Bear Valley Springs
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Old West Appliance Repair
1508 Edna St, Bakersfield, CA 93304
24.3 mi from Bear Valley Springs
★★★★★ 5.0 (4 reviews)
Saturday hours

Companies are shown by relevance and distance from Bear Valley Springs. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Washer repair near Bear Valley Springs at a glance
Appliance repair companies in range (30 mi)40
With 4.5+ stars and at least 10 reviews3
Mention a major washer brand0
Three nearest companies, miles away3.7, 11.1, 16.3
Mention washer work2
Listing Saturday hours26

First up for Bear Valley Springs: Sears Appliance Repair (24.6 miles away, based in Bakersfield, 4.4 stars from 295 reviews, lists Saturday hours); Bakersfield Area Appliance Repair (25.4 miles away, based in Bakersfield, 5.0 stars from 1 reviews); Appliance Repair Specialist (26.7 miles away, based in Bakersfield, 4.6 stars from 4,635 reviews); Zip Appliance & Plumbing Repair (26.4 miles away, based in Bakersfield, 4.8 stars from 1,299 reviews, lists Saturday hours).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Washer fills slowly, will not fill, or keeps filling
  • Burning smell or a motor that hums without turning
  • Musty or mildew smell from the drum or door seal
  • Grinding or roaring noise that rises with spin speed

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.

What a Washing Machine Technician Checks

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.

Troubleshooting first? Start with washer not draining or front-load vs top-load washer problems.

Before Anyone Touches the Washer

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Bear Valley Springs

Before replacing a washer in Bear Valley Springs, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Bear Valley Springs, CA

Most washer calls in Bear Valley Springs come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services

In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).

Questions to Ask a Bear Valley Springs Washer Technician

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Is your company licensed where my state requires it, and insured?
  • Can you give a written estimate before ordering parts?

Washing Machine Repair FAQs: Bear Valley Springs, CA

Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Find Your Washer Brand in Bear Valley Springs

Washing Machine Repair in Nearby Cities

Before you call a Bear Valley Springs technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech