Serving Millbrook, Alabama and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Millbrook, AL

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Millbrook.

Talk to a washing machine tech near Millbrook
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Millbrook✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. The Millbrook list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Millbrook, AL

Our data shows 28 appliance repair companies inside a 60-mile radius of Millbrook. 1 of them are based in Millbrook itself, and the rest are spread across Prattville (3), Montgomery (3), and Selma (3). Distances run up to about 59 miles. 3 of them mention washing machine or washer work in their listing or website. Nearest on the list: J & B Appliance Repair, around 2.1 miles out. Rated companies nearby average 4.0 stars across 24 businesses. Millbrook is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
1605 7th St N, Clanton, AL 35045
28.5 mi from Millbrook
★★★★½ 4.3 (400 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2908 Citizens Pkwy, Selma, AL 36701
37.8 mi from Millbrook
★★★★½ 4.4 (72 reviews)
Mentions washersSaturday hours
Appliance Repair
Clark-Rothschild Appliance Repair- Refrigerator, Freezer and Ice Machine specialist
709 Coleman Way, Prattville, AL 36067
6.1 mi from Millbrook
★★★★½ 4.7 (90 reviews)
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
3720 Pepperell Pkwy, Opelika, AL 36801
55.5 mi from Millbrook
★★★★½ 4.3 (149 reviews)
Mentions washersSaturday hours
Appliance Repair
J & B Appliance Repair
520 Canton Rd, Millbrook, AL 36054
2.1 mi from Millbrook
★★★½ 3.6 (23 reviews)
Saturday hours
Appliance Repair
The Appliance Man
410 E Main St, Prattville, AL 36067
6.1 mi from Millbrook
★★★★ 3.9 (143 reviews)
Appliance Repair
Tri County Appliance
110 Hillhedge Rd, Elmore, AL 36025
2.6 mi from Millbrook
★★½ 2.5 (30 reviews)
Appliance Repair
Hare Appliance Service
1596 Co Rd 57, Prattville, AL 36067
9.1 mi from Millbrook
Appliance Repair
The Appliance Shop
81289 Tallassee Hwy, Eclectic, AL 36024
18.5 mi from Millbrook
★★★★★ 5.0 (1 review)
Appliance Repair
Auburn Appliance Sales & Service
1775 Opelika Rd Ste 14, Auburn, AL 36830
54.8 mi from Millbrook
★★★★★ 5.0 (327 reviews)
Saturday hours
Appliance Repair
IHS Services
1100 John Overton Dr, Montgomery, AL 36109
9.6 mi from Millbrook
★★★½ 3.3 (15 reviews)
Appliance Repair
Martin Appliance
107 Franklin St, Selma, AL 36703
38.1 mi from Millbrook
★★★★★ 4.8 (8 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Millbrook
Name washers or washing machines in their listing3
Mention a major washer brand0
Rated 4.5 stars or higher (10+ reviews)6
Three nearest companies, miles away2.1, 2.6, 6.1
Listing Saturday hours12
Repair companies inside 60 miles28

First up for Millbrook: Sears Appliance Repair (28.5 miles away, based in Clanton, 4.3 stars from 400 reviews, lists Saturday hours); Sears Appliance Repair (37.8 miles away, based in Selma, 4.4 stars from 72 reviews, lists Saturday hours); Clark-Rothschild Appliance Repair- Refrigerator, Freezer and Ice Machine specialist (6.1 miles away, based in Prattville, 4.7 stars from 90 reviews, lists Saturday hours); Sears Appliance Repair (55.5 miles away, based in Opelika, 4.3 stars from 149 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Burning smell or a motor that hums without turning
  • Water on the floor under or in front of the washer
  • Washer fills slowly, will not fill, or keeps filling
  • Grinding or roaring noise that rises with spin speed

The Usual Washer Culprits in Millbrook

Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

What a Washing Machine Technician Checks

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not draining or washer not filling with water.

If Your Washer Is Leaking

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Millbrook

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Millbrook, AL

Most washer calls in Millbrook come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Alabama does not issue a separate appliance repair license, and the state's heating, air conditioning and refrigeration contractor law expressly excludes work on household appliances, residential refrigerators and ice machines. Source: Code of Alabama 1975, Section 34-31-18 et seq. (Alabama Board of Heating, Air Conditioning & Refrigeration Contractors)

In Alabama, you can check a license with the Alabama Plumbers and Gas Fitters Examining Board Individual Licensee Search or report a problem to the Alabama Attorney General's Office, Consumer Interest Division.

Before You Book in Millbrook

  • Is your company licensed where my state requires it, and insured?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Millbrook, AL

Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Washer Repair by Brand in Millbrook

Washing Machine Repair Near Millbrook

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Millbrook technician a trip for parts.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech