If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Culpeper
Within 30 miles of Culpeper there are 21 appliance repair companies in our data. 2 of them are based in Culpeper itself, and the rest are spread across Fredericksburg (4), Stafford (4), and Warrenton (2). Nearest on the list: NTS Appliance Pros, around 0.5 miles out. No company within 30 miles of Culpeper names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 20 rated companies in range average 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 0.5, 2.0, 6.7 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 10 |
| Listing Saturday hours | 7 |
| Mention washer work | 3 |
| Mention Maytag | 0 |
| Repair companies inside 30 miles | 21 |
The leading options for Culpeper are Arlington Maytag Appliance Rpr (56.0 miles away, based in Arlington, 3.8 stars from 11 reviews); Maytag (60.3 miles away, based in Washington, 2.0 stars from 11 reviews); Sears Appliance Repair (21.1 miles away, based in Warrenton, 4.2 stars from 166 reviews, lists Saturday hours); Piedmont Appliance Repair, Inc (2.0 miles away, 4.6 stars from 26 reviews).
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- An error code on the display
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Around Culpeper
Most washer calls in Culpeper come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Virginia's Board for Contractors has no appliance repair license classification, but its gas fitting contracting specialty covers installing, repairing or removing gas piping and appliances attached to real property. Source: 18VAC50-22-30, Definitions of specialty services
In Virginia, you can check a license with the DPOR License Lookup or report a problem to the Office of the Attorney General of Virginia, Consumer Protection Section.
Questions to Ask a Culpeper Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Is your company licensed where my state requires it, and insured?
Maytag Washer Repair FAQs: Culpeper, VA
How do I find a technician who knows Maytag washers?
Why won't my washer spin?
What should I do about a Maytag error code?
Where is the water under my washer coming from?
Related Repair Pages for Culpeper
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.