Most Maytag washer repairs in Friendswood involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Friendswood, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Friendswood
We found 40 appliance repair companies within 30 miles of Friendswood. 3 of them are based in Friendswood itself, and other nearby bases include Pasadena (15), League City (6), and Manvel (3). Distances run up to about 14 miles. None of the companies within 30 miles mention Maytag by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is H & S Appliance Repair, about 2.2 miles away. Rated companies nearby average 4.3 stars across 38 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 60 |
|---|---|
| Open on Saturdays (per listing) | 42 |
| Distance to the three closest (mi) | 2.2, 3.2, 3.7 |
| Mention Maytag | 0 |
| With 4.5+ stars and at least 10 reviews | 22 |
| Name washers or washing machines in their listing | 20 |
At the top of the Friendswood list: AAA Maytag Home Appliance (23.8 miles away, based in Houston, 4.4 stars from 13 reviews, lists Saturday hours); Mr. Appliance of League City (3.2 miles away, 4.8 stars from 765 reviews, lists Saturday hours); Superior Appliances Repair (11.5 miles away, based in Pasadena, 4.9 stars from 81 reviews, lists Saturday hours); Sears Appliance Repair (12.7 miles away, based in Pasadena, 4.5 stars from 271 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
When to Call for Maytag Washer Repair
- Loud banging, shaking or walking during the spin
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Friendswood, TX
Most washer calls in Friendswood come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Friendswood
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Friendswood, TX
How do I get rid of a washer mildew smell?
Which Friendswood technicians work on Maytag?
Is this Maytag customer service?
Where is the water under my washer coming from?
Other Washer Repair in Friendswood
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.