Maytag owners in Andrews usually want two things from a repair company: experience with the brand and quick access to parts. The Andrews list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Andrews TX
Our data shows 12 appliance repair companies inside a 60-mile radius of Andrews. Other nearby bases include Midland (7), Odessa (3), and Seminole (1). Distances run up to about 44 miles. None of the repair companies near Andrews name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Fehr's Appliance Repair Center, about 25.9 miles away. Across 10 rated companies, the average public rating is 3.5 stars. Because the nearest shops are farther out, ask each company whether Andrews is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 25.9, 31.7, 31.8 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 1 |
| Mention Maytag | 0 |
| Listing Saturday hours | 9 |
| Name washers or washing machines in their listing | 5 |
| Repair companies inside 60 miles | 12 |
The leading options for Andrews are Sears Appliance Repair (31.8 miles away, based in Odessa, 3.5 stars from 43 reviews, lists Saturday hours); Sears Appliance Repair (31.7 miles away, based in Midland, 3.7 stars from 50 reviews, lists Saturday hours); ASAP Laundry Equipment (33.6 miles away, based in Odessa, 3.5 stars from 2 reviews, lists Saturday hours); Junior's Appliances Sales & Repair (35.3 miles away, based in Odessa, 2.0 stars from 8 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Maytag Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Andrews
Owner Care for Maytag Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
Around Andrews
Most washer calls in Andrews come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Andrews
- Do you work on front-load and top-load washers, or only one type?
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Andrews, TX
Why won't my washer spin?
What should I do about a Maytag error code?
Why is my washer leaking?
How do I get rid of a washer mildew smell?
Related Repair Pages for Andrews
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.