If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The James Island list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near James Island
31 repair companies serve James Island from within 30 miles. Other nearby bases include Charleston (11), Summerville (6), and North Charleston (5). Distances run up to about 24 miles. None of the repair companies near James Island name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. D & S Appliance Repair Services is the nearest, roughly 0.3 miles from James Island. Across 28 rated companies, the average public rating is 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 11 |
|---|---|
| Repair companies inside 30 miles | 31 |
| Rated 4.5 stars or higher (10+ reviews) | 16 |
| Listing Saturday hours | 18 |
| Three nearest companies, miles away | 0.3, 1.0, 2.9 |
| Mention Maytag | 0 |
At the top of the James Island list: 911 Service Today (8.6 miles away, based in Charleston, 4.9 stars from 1,001 reviews, lists Saturday hours); Charleston Appliances and Repairs (10.8 miles away, based in North Charleston, 4.8 stars from 650 reviews, lists Saturday hours); Mr. Appliance of Charleston (6.4 miles away, based in Charleston, 4.9 stars from 427 reviews); Sears Appliance Repair (6.8 miles away, based in Charleston, 4.6 stars from 235 reviews, lists Saturday hours).
Know Your Maytag Washer
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Maytag Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What James Island Owners Should Know
Most washer calls in James Island come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Hiring a Washer Repair Company in James Island
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: James Island, SC
How do I find a technician who knows Maytag washers?
Where is the water under my washer coming from?
Is my Maytag washer worth repairing?
Other Washer Repair in James Island
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a James Island technician bring the right parts.