If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Sherwood list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Independent Maytag Washer Technicians, Sherwood OR
Our data shows 40 appliance repair companies inside a 30-mile radius of Sherwood. 3 list an address in Sherwood, and other nearby bases include Beaverton (9), Tigard (6), and Portland (6). Distances run up to about 11 miles. None of the repair companies near Sherwood name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Appliance Wizard, about 0.2 miles away. Rated companies nearby average 4.8 stars across 25 businesses.
Companies are shown by relevance and distance from Sherwood. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 9 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Mention Maytag | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 12 |
| Distance to the three closest (mi) | 0.2, 0.5, 1.0 |
| Open on Saturdays (per listing) | 37 |
Closest matches for Sherwood: A&P Appliance Parts and Service (9.0 miles away, based in Beaverton, 4.7 stars from 257 reviews, lists Saturday hours); Mr. Appliance of Portland (6.6 miles away, based in Portland, 4.8 stars from 691 reviews, lists Saturday hours); Hydra Appliance Repair (10.6 miles away, based in Portland, 4.7 stars from 231 reviews, lists Saturday hours); Rox Services Inc (7.5 miles away, based in Beaverton, 4.9 stars from 155 reviews).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Maytag Washer
What Makes Maytag Washer Repairs Different
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Says to Check First
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Water left in the drum after the cycle
- Loud banging, shaking or walking during the spin
- An error code on the display
How a Washer Service Call Usually Goes in Sherwood
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Sherwood, OR
Most washer calls in Sherwood come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.
Questions to Ask a Sherwood Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Maytag washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Sherwood, OR
Is this Maytag customer service?
Why does my front-load washer smell?
What stops a washer from spinning?
More Washing Machine Repair in Sherwood, OR
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Sherwood technician bring the right parts.