A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Clinton list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Clinton
6 repair companies serve Clinton from within 68 miles. 1 of them are based in Clinton itself, and other nearby bases include Weatherford (1), Elk City (1), and Okarche (1). No company within 90 miles of Clinton mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Sears Appliance Repair is the nearest, roughly 1.1 miles from Clinton. Rated companies nearby average 4.1 stars across 6 businesses. Because the nearest shops are farther out, ask each company whether Clinton is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (68 mi) | 6 |
|---|---|
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 1.1, 17.1, 27.1 |
| Open on Saturdays (per listing) | 5 |
| Mention washer work | 4 |
| With 4.5+ stars and at least 10 reviews | 2 |
Closest matches for Clinton: Sears Appliance Repair (1.1 miles away, 4.5 stars from 14 reviews, lists Saturday hours); Wisdom Refrigeration, Heating & Cooling (17.1 miles away, based in Weatherford, 5.0 stars from 281 reviews, lists Saturday hours); Sears Appliance Repair (27.1 miles away, based in Elk City, 4.3 stars from 6 reviews, lists Saturday hours); Sears Appliance Repair (67.1 miles away, based in Woodward, 4.8 stars from 8 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
When to Call for Maytag Washer Repair
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
How a Washer Service Call Usually Goes in Clinton
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Local Notes for Clinton
Most washer calls in Clinton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
How to Choose a Washing Machine Technician Near Clinton
- Will you check the drain pump filter and drain hose before replacing the pump?
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Clinton, OK
What stops a washer from spinning?
Why does my front-load washer smell?
Where is the water under my washer coming from?
Other Washer Repair in Clinton
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.