Maytag owners in Kenmore usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Kenmore, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Kenmore
Within 30 miles of Kenmore there are 29 appliance repair companies in our data. Other nearby bases include Buffalo (8), Williamsville (3), and Niagara Falls (3). Boriso is the nearest, roughly 2.7 miles from Kenmore. No company within 90 miles of Kenmore mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 25 businesses.
Companies are shown by relevance and distance from Kenmore. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 2.7, 2.7, 2.9 |
|---|---|
| Mention Maytag | 0 |
| Open on Saturdays (per listing) | 19 |
| Repair companies inside 30 miles | 29 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Mention washer work | 11 |
At the top of the Kenmore list: Orville's Home Appliances (3.1 miles away, based in Eggertsville, 4.7 stars from 2,722 reviews, lists Saturday hours); Dillon's Washer Service (2.7 miles away, based in Tonawanda, 4.7 stars from 19 reviews); Sears Appliance Repair (9.0 miles away, based in Williamsville, 4.3 stars from 137 reviews, lists Saturday hours); Sears Appliance Repair (12.8 miles away, based in Buffalo, 4.6 stars from 107 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Kenmore
Most washer calls in Kenmore come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Before You Book in Kenmore
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Kenmore, NY
Why does my front-load washer smell?
How do I find a technician who knows Maytag washers?
Is my Maytag washer worth repairing?
Other Washer Repair in Kenmore
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.