If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Ventnor City list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Ventnor City
Our data shows 21 appliance repair companies inside a 30-mile radius of Ventnor City. 1 list an address in Ventnor City, and other nearby bases include Pleasantville (3), Galloway (3), and Somers Point (2). Distances run up to about 27 miles. The closest is C & R Appliance of Galloway Inc, about 0.6 miles away. No company within 90 miles of Ventnor City mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 19 rated companies in range average 4.5 stars.
Companies are shown by relevance and distance from Ventnor City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| With 4.5+ stars and at least 10 reviews | 8 |
|---|---|
| Listing Saturday hours | 10 |
| Distance to the three closest (mi) | 0.6, 1.8, 3.6 |
| Mention Maytag | 0 |
| Appliance repair companies in range (30 mi) | 21 |
| Mention washer work | 5 |
Closest matches for Ventnor City: C and R Appliance Of Galloway Inc (10.0 miles away, based in Galloway, 4.9 stars from 69 reviews); Washer Doctor. (4.4 miles away, based in Pleasantville, 4.8 stars from 9 reviews, lists Saturday hours); Mr. Appliance of Atlantic and Cape May (20.0 miles away, based in Cape May Court House, 4.7 stars from 479 reviews, lists Saturday hours); Sears Appliance Repair (11.3 miles away, based in Mays Landing, 4.2 stars from 210 reviews, lists Saturday hours).
Know Your Maytag Washer
How Maytag Washers Are Built
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Symptoms and First Checks
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Ventnor City Owners Should Know
Most washer calls in Ventnor City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
In New Jersey, you can check a license with the New Jersey Division of Consumer Affairs License Verification System or report a problem to the New Jersey Division of Consumer Affairs.
How to Choose a Washing Machine Technician Near Ventnor City
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Ventnor City, NJ
How do I find a technician who knows Maytag washers?
What stops a washer from spinning?
How do I get rid of a washer mildew smell?
Related Repair Pages for Ventnor City
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.