Most Maytag washer repairs in Colonia involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Colonia
40 repair companies serve Colonia from within 30 miles. The rest are spread across Perth Amboy (6), Edison (4), and Linden (4). No company within 90 miles of Colonia mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Edison Appliance Repair Service, around 1.3 miles out. Across 31 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 20 |
|---|---|
| Mention washer work | 20 |
| Mention Maytag | 0 |
| Three nearest companies, miles away | 1.3, 1.3, 1.7 |
| Companies within 30 miles | 60 |
| Open on Saturdays (per listing) | 52 |
First up for Colonia: Top Tech Appliance Repair LLC (4.6 miles away, based in Carteret, 5.0 stars from 125 reviews, lists Saturday hours); Sears Appliance Repair (6.1 miles away, based in Watchung, 4.5 stars from 254 reviews, lists Saturday hours); American Appliance Service (3.4 miles away, based in Port Reading, 4.8 stars from 189 reviews, lists Saturday hours); Elm Appliance (4.3 miles away, based in Westfield, 4.8 stars from 39 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
How Maytag Washers Are Built
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- An error code on the display
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Colonia
Most washer calls in Colonia come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
In New Jersey, you can check a license with the New Jersey Division of Consumer Affairs License Verification System or report a problem to the New Jersey Division of Consumer Affairs.
Hiring a Washer Repair Company in Colonia
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Colonia, NJ
Is this Maytag customer service?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Why does my Maytag washer show an error code?
Other Washer Repair in Colonia
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.