Most Maytag washer repairs in Mocksville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Mocksville, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Mocksville NC
Our data shows 40 appliance repair companies inside a 30-mile radius of Mocksville. 1 list an address in Mocksville, and other nearby bases include Winston-Salem (9), Salisbury (8), and Mooresville (7). Nearest on the list: Davie Major Appliance Repair, around 0.8 miles out. No company within 90 miles of Mocksville mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 27 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 32 |
|---|---|
| Mention Maytag | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Repair companies inside 30 miles | 46 |
| Mention washer work | 8 |
| Three nearest companies, miles away | 0.8, 13.7, 13.9 |
Closest matches for Mocksville: Davie Major Appliance Repair (0.8 miles away, 4.9 stars from 188 reviews); Sears Appliance Repair (13.7 miles away, based in Clemmons, 4.6 stars from 290 reviews, lists Saturday hours); LKN Appliance Repair Statesville (19.8 miles away, based in Statesville, 4.9 stars from 12 reviews, lists Saturday hours); Quick Reliable Appliance Repair of Mooresville, NC (28.7 miles away, based in Mooresville, 4.7 stars from 92 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- An error code on the display
- Grinding or roaring noise that rises with spin speed
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Mocksville Washer Call
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Mocksville Owners Should Know
Most washer calls in Mocksville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Questions to Ask a Mocksville Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Mocksville, NC
Should I repair or replace my Maytag washer?
Which Mocksville technicians work on Maytag?
How do I get rid of a washer mildew smell?
Why does my Maytag washer show an error code?
Other Washer Repair in Mocksville
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Mocksville technician bring the right parts.