Most Maytag washer repairs in Eden involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Eden, with those that mention Maytag first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Maytag Washer Repair Near Eden
Within 30 miles of Eden there are 24 appliance repair companies in our data. 3 of them are based in Eden itself, and the rest are spread across Greensboro (10), Danville (2), and Gibsonville (2). The farthest listed company is about 30 miles out. Alpha Appliances is the nearest, roughly 2.2 miles from Eden. None of the repair companies near Eden name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 21 rated companies in range average 4.1 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 24 |
|---|---|
| Mention Maytag | 0 |
| Listing Saturday hours | 14 |
| Distance to the three closest (mi) | 2.2, 2.5, 3.7 |
| Mention washer work | 3 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
At the top of the Eden list: Edward's Appliance Service (18.8 miles away, based in Gibsonville, 4.8 stars from 24 reviews); Sears Appliance Repair (29.3 miles away, based in Greensboro, 4.4 stars from 955 reviews, lists Saturday hours); Porterfield's Appliance Repair (25.3 miles away, based in Burlington, 4.6 stars from 30 reviews, lists Saturday hours); Alpha Appliances (2.2 miles away, 3.9 stars from 8 reviews, lists Saturday hours).
Maytag Washer Lines and Features
What Makes Maytag Washer Repairs Different
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
What Maytag Says to Check First
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
When to Call for Maytag Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Eden Owners Should Know
Most washer calls in Eden come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Questions to Ask a Eden Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Eden, NC
Do you work for Maytag?
How do I find a technician who knows Maytag washers?
Why does my Maytag washer show an error code?
How do I get rid of a washer mildew smell?
More Washing Machine Repair in Eden, NC
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Eden technician bring the right parts.