Most Maytag washer repairs in Hernando involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Hernando, with those that mention Maytag first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Hernando
Our data shows 23 appliance repair companies inside a 30-mile radius of Hernando. Other nearby bases include Memphis (10), Bartlett (4), and Collierville (3). Distances run up to about 28 miles. No company within 90 miles of Hernando mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is All Major Appliance Services, about 10.0 miles away. The 21 rated companies in range average 4.0 stars.
Companies are shown by relevance and distance from Hernando. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 10.0, 11.9, 13.1 |
|---|---|
| Mention Maytag | 0 |
| Listing Saturday hours | 12 |
| Companies within 30 miles | 23 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Name washers or washing machines in their listing | 7 |
At the top of the Hernando list: Sears Appliance Repair (22.2 miles away, based in Collierville, 4.6 stars from 466 reviews, lists Saturday hours); Mr. Appliance of Memphis (25.7 miles away, based in Cordova, 4.7 stars from 1,977 reviews); Affordable Appliance Repair Ms (13.1 miles away, based in Byhalia, 4.6 stars from 61 reviews); Sears Appliance Repair (26.8 miles away, based in Memphis, 4.6 stars from 941 reviews, lists Saturday hours).
Maytag Washer Lines and Features
What Makes Maytag Washer Repairs Different
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Maytag Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Hernando
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- Any error code shown on the display
Around Hernando
Most washer calls in Hernando come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications
In Mississippi, you can check a license with the MSBOC Check A License or report a problem to the Mississippi Attorney General's Office, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Hernando
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
Maytag Washer Repair FAQs: Hernando, MS
Why does my Maytag washer show an error code?
Why is my washer leaking?
How do I find a technician who knows Maytag washers?
Why does my front-load washer smell?
More Washing Machine Repair in Hernando, MS
Maytag Washer Repair in Nearby Cities
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Hernando technician bring the right parts.