Most Maytag washer repairs in Town and Country involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Town and Country, with those that mention Maytag first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Maytag Washer Repair Near Town and Country
Within 30 miles of Town and Country there are 40 appliance repair companies in our data. The rest are spread across St. Louis (17), Hazelwood (3), and Chesterfield (2). The farthest listed company is about 13 miles out. Mr. Appliance of Greater St. Louis is the nearest, roughly 2.5 miles from Town and Country. No company within 30 miles of Town and Country names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.2 stars across 30 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Repair companies inside 30 miles | 60 |
|---|---|
| Three nearest companies, miles away | 2.5, 3.1, 4.8 |
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Listing Saturday hours | 43 |
| Mention Maytag | 0 |
| Name washers or washing machines in their listing | 12 |
At the top of the Town and Country list: Advantage Maytag (25.4 miles away, based in Collinsville, 3.9 stars from 49 reviews, lists Saturday hours); All American Appliance and HVAC Services (8.2 miles away, based in St. Louis, 4.7 stars from 2,771 reviews, lists Saturday hours); P.A.C.E. Appliance Repair (10.8 miles away, based in St Charles, 4.9 stars from 423 reviews); Mr. Appliance of Greater St. Louis (2.5 miles away, based in Ballwin, 4.8 stars from 1,345 reviews, lists Saturday hours).
Maytag Washer Lines and Features
How Maytag Washers Are Built
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
What Maytag Says to Check First
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- An error code on the display
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- How old the washer is
What Town and Country Owners Should Know
Most washer calls in Town and Country come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Before You Book in Town and Country
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Maytag washers, and how quickly can you get parts?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Town and Country, MO
Should I repair or replace my Maytag washer?
Why won't my washer spin?
How do I get rid of a washer mildew smell?
Other Washer Repair in Town and Country
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.