Most Maytag washer repairs in Oak Park involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Oak Park, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Oak Park
We found 40 appliance repair companies within 30 miles of Oak Park. The rest are spread across Detroit (12), Warren (5), and Livonia (5). Distances run up to about 11 miles. Nearest on the list: Appliance Alliance Group, around 1.4 miles out. Of those, 1 mentions Maytag by name. Across 34 rated companies, the average public rating is 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Companies within 30 miles | 60 |
|---|---|
| Open on Saturdays (per listing) | 37 |
| With 4.5+ stars and at least 10 reviews | 16 |
| Mention Maytag | 1 |
| Three nearest companies, miles away | 1.4, 2.0, 2.1 |
| Mention washer work | 14 |
At the top of the Oak Park list: A Dependable Maytag Home Appliance (4.3 miles away, based in Royal Oak, 4.3 stars from 101 reviews, lists Saturday hours); Sears Appliance Repair (5.1 miles away, based in Warren, 4.6 stars from 448 reviews, lists Saturday hours); Sears Appliance Repair (10.5 miles away, based in Livonia, 4.6 stars from 149 reviews, lists Saturday hours); Sears Appliance Repair (8.3 miles away, based in Livonia, 4.6 stars from 258 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
- Water left in the drum after the cycle
What Gets Fixed on a Oak Park Washer Call
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Oak Park, MI
Most washer calls in Oak Park come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Oak Park
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Oak Park, MI
How do I get rid of a washer mildew smell?
Which Oak Park technicians work on Maytag?
What stops a washer from spinning?
Related Repair Pages for Oak Park
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.