Maytag owners in Grandville usually want two things from a repair company: experience with the brand and quick access to parts. The Grandville list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Grandville
We found 40 appliance repair companies within 30 miles of Grandville. 3 list an address in Grandville, and other nearby bases include Grand Rapids (8), Holland (5), and Muskegon (4). Distances run up to about 29 miles. No company within 90 miles of Grandville mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Midwest Food Equipment Service, Inc., around 1.1 miles out. Rated companies nearby average 4.4 stars across 39 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 18 |
|---|---|
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 1.1, 1.1, 1.4 |
| Name washers or washing machines in their listing | 10 |
| Companies within 30 miles | 40 |
| With 4.5+ stars and at least 10 reviews | 20 |
At the top of the Grandville list: Sears Appliance Repair (1.4 miles away, 4.3 stars from 492 reviews, lists Saturday hours); Big Lake Appliance Service (17.0 miles away, based in Conklin, 4.8 stars from 237 reviews); Bekins (14.1 miles away, based in Coopersville, 4.8 stars from 131 reviews, lists Saturday hours); UDG Services LLC (24.0 miles away, based in Holland, 4.9 stars from 242 reviews).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
How Maytag Washers Are Built
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- An error code on the display
How a Washer Service Call Usually Goes in Grandville
Owner Care for Maytag Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
What Grandville Owners Should Know
Most washer calls in Grandville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Grandville Washer Technician
- Is your company licensed where my state requires it, and insured?
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Grandville, MI
Do you work for Maytag?
Where is the water under my washer coming from?
What should I do about a Maytag error code?
Why won't my washer spin?
Related Repair Pages for Grandville
Maytag Washer Repair Near Grandville
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.