Most Maytag washer repairs in Sandpoint involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Sandpoint, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Sandpoint
Our data shows 38 appliance repair companies inside a 60-mile radius of Sandpoint. 1 of them are based in Sandpoint itself, and the rest are spread across Spokane (16), Spokane Valley (8), and Coeur d'Alene (3). The farthest listed company is about 59 miles out. 1 lists Maytag specifically. Nearest on the list: Peter's Appliance Services, around 7.7 miles out. Across 33 rated companies, the average public rating is 4.6 stars. Sandpoint is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Sandpoint. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 60 miles | 38 |
|---|---|
| Mention Maytag | 1 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Mention washer work | 14 |
| Listing Saturday hours | 25 |
| Distance to the three closest (mi) | 7.7, 35.3, 36.3 |
Closest matches for Sandpoint: Genuine Maytag Repair (52.1 miles away, based in Spokane, 4.0 stars from 5 reviews, lists Saturday hours); Allway Service Appliance repair & Refrigeration repair (51.8 miles away, based in Spokane Valley, 4.9 stars from 495 reviews, lists Saturday hours); Pillar, Heating Air Appliance (39.4 miles away, based in Dalton Gardens, 5.0 stars from 533 reviews); Sears Appliance Repair (39.5 miles away, based in Coeur d'Alene, 4.6 stars from 76 reviews, lists Saturday hours).
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Sandpoint
Care Maytag Recommends for Its Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Sandpoint, ID
Most washer calls in Sandpoint come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
In Idaho, you can check a license with the Idaho DOPL Search for a License or Registration or report a problem to the Idaho Attorney General Consumer Protection Division.
Hiring a Washer Repair Company in Sandpoint
- How often do you repair Maytag washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Sandpoint, ID
How do I find a technician who knows Maytag washers?
Should I repair or replace my Maytag washer?
Why won't my washer spin?
Related Repair Pages for Sandpoint
Maytag Washer Repair Near Sandpoint
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.