Maytag owners in McDonough usually want two things from a repair company: experience with the brand and quick access to parts. The McDonough list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, McDonough GA
Within 30 miles of McDonough there are 40 appliance repair companies in our data. 10 list an address in McDonough, and other nearby bases include Conyers (4), Stockbridge (3), and Covington (3). The farthest listed company is about 20 miles out. Nearest on the list: Commercial Appliance Parts & Service, LLC, around 1.0 miles out. No company within 90 miles of McDonough mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 32 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 35 |
|---|---|
| Mention washer work | 12 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Distance to the three closest (mi) | 1.0, 1.3, 2.0 |
| Repair companies inside 30 miles | 60 |
| Mention Maytag | 0 |
The leading options for McDonough are Appliance Allstars (10.6 miles away, based in Stockbridge, 4.7 stars from 1,142 reviews); Sears Appliance Repair (2.6 miles away, 4.6 stars from 311 reviews, lists Saturday hours); Triple 'R' Technology LLC (16.7 miles away, based in Conyers, 5.0 stars from 57 reviews, lists Saturday hours); Sears Appliance Repair (17.3 miles away, based in Fayetteville, 4.4 stars from 373 reviews, lists Saturday hours).
Maytag Washer Lines and Features
How Maytag Washers Are Built
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Washer fills slowly, will not fill, or keeps filling
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Care Maytag Recommends for Its Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
What McDonough Owners Should Know
Most washer calls in McDonough come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
In Georgia, you can check a license with the Georgia Secretary of State Licensing Division License Lookup or report a problem to the Georgia Attorney General's Consumer Protection Division.
Before You Book in McDonough
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: McDonough, GA
Is this Maytag customer service?
How do I find a technician who knows Maytag washers?
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Other Washer Repair in McDonough
Maytag Washer Repair Near McDonough
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a McDonough technician bring the right parts.