A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Warm Mineral Springs
Our data shows 40 appliance repair companies inside a 30-mile radius of Warm Mineral Springs. Other nearby bases include Venice (11), Englewood (11), and North Port (9). Distances run up to about 14 miles. None of the repair companies near Warm Mineral Springs name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. West Coast Repairmen Appliance Repair Company is the nearest, roughly 1.0 miles from Warm Mineral Springs. The 32 rated companies in range average 4.9 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Maytag | 0 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Name washers or washing machines in their listing | 19 |
| Distance to the three closest (mi) | 1.0, 2.0, 2.2 |
| Rated 4.5 stars or higher (10+ reviews) | 23 |
| Open on Saturdays (per listing) | 39 |
The leading options for Warm Mineral Springs are Mr. Appliance of Charlotte, Desoto & Southern Sarasota (14.0 miles away, based in Punta Gorda, 4.8 stars from 1,025 reviews, lists Saturday hours); LK Appliance Repair (10.2 miles away, based in Venice, 4.9 stars from 243 reviews, lists Saturday hours); Alex Crew LLC Appliances Repair Services (2.0 miles away, based in North Port, 5.0 stars from 188 reviews, lists Saturday hours); Sears Appliance Repair (8.1 miles away, based in Englewood, 4.7 stars from 138 reviews, lists Saturday hours).
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Maytag Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Warm Mineral Springs
Owner Care for Maytag Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Warm Mineral Springs
Most washer calls in Warm Mineral Springs come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
Questions to Ask a Warm Mineral Springs Washer Technician
- Can you give a written estimate before ordering parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Warm Mineral Springs, FL
Why does my Maytag washer show an error code?
Is my Maytag washer worth repairing?
Why does my front-load washer smell?
Which Warm Mineral Springs technicians work on Maytag?
Other Washer Repair in Warm Mineral Springs
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.