If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Sanford list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Sanford FL
We found 40 appliance repair companies within 30 miles of Sanford. 5 of them are based in Sanford itself, and the rest are spread across Deltona (6), Winter Springs (5), and Longwood (4). The farthest listed company is about 12 miles out. No company within 90 miles of Sanford mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Signature Sanford Appliance Repair is the nearest, roughly 0.9 miles from Sanford. The 34 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 20 |
|---|---|
| Mention Maytag | 0 |
| Name washers or washing machines in their listing | 18 |
| Open on Saturdays (per listing) | 45 |
| Companies within 30 miles | 60 |
| Distance to the three closest (mi) | 0.9, 1.4, 1.7 |
At the top of the Sanford list: Hartman's Appliance Repair Sanford (1.7 miles away, 4.8 stars from 233 reviews, lists Saturday hours); Reliable Appliance Repair Longwood (10.5 miles away, based in Longwood, 4.9 stars from 171 reviews, lists Saturday hours); Level Appliance Repair (6.6 miles away, based in Winter Springs, 4.9 stars from 73 reviews); Sears Appliance Repair (4.0 miles away, 4.7 stars from 342 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
How a Washer Service Call Usually Goes in Sanford
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Sanford Owners Should Know
Most washer calls in Sanford come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
Questions to Ask a Sanford Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Sanford, FL
Why won't my washer spin?
Why does my front-load washer smell?
Is my Maytag washer worth repairing?
Is this Maytag customer service?
Related Repair Pages for Sanford
Maytag Washer Repair Near Sanford
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Sanford technician bring the right parts.