Most Maytag washer repairs in Lone Tree involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Lone Tree, with those that mention Maytag first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Who Works on Maytag Washers Near Lone Tree
Within 30 miles of Lone Tree there are 40 appliance repair companies in our data. 2 list an address in Lone Tree, and the rest are spread across Parker (13), Highlands Ranch (5), and Centennial (5). Distances run up to about 8 miles. No company within 30 miles of Lone Tree names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Mr. Appliance of Littleton is the nearest, roughly 0.5 miles from Lone Tree. The 35 rated companies in range average 4.9 stars.
Companies are shown by relevance and distance from Lone Tree. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Distance to the three closest (mi) | 0.5, 0.6, 1.8 |
| Open on Saturdays (per listing) | 41 |
| Mention washer work | 13 |
| With 4.5+ stars and at least 10 reviews | 19 |
| Mention Maytag | 0 |
First up for Lone Tree: Mountain Maytag (10.5 miles away, based in Aurora, 4.5 stars from 120 reviews, lists Saturday hours); Mr. Appliance of Parker (5.3 miles away, based in Parker, 4.8 stars from 1,142 reviews); Mr. Appliance of Littleton (0.5 miles away, based in Englewood, 4.9 stars from 741 reviews, lists Saturday hours); Denver Appliance Repair Service (7.0 miles away, based in Highlands Ranch, 4.8 stars from 465 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Lone Tree Owners Should Know
Most washer calls in Lone Tree come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Lone Tree
- If the washer is leaking, will you find where the water starts before quoting a part?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Lone Tree, CO
Do you work for Maytag?
What stops a washer from spinning?
Is my Maytag washer worth repairing?
Why does my Maytag washer show an error code?
Related Repair Pages for Lone Tree
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.