Most Maytag washer repairs in Berthoud involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Berthoud list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Berthoud CO
We found 40 appliance repair companies within 30 miles of Berthoud. Other nearby bases include Fort Collins (14), Loveland (8), and Longmont (7). The closest is Jim & Dave's Appliance, about 5.6 miles away. No company within 30 miles of Berthoud names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.6 stars across 37 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention washer work | 11 |
|---|---|
| Listing Saturday hours | 37 |
| Mention Maytag | 0 |
| Companies within 30 miles | 60 |
| Distance to the three closest (mi) | 5.6, 6.1, 6.5 |
| With 4.5+ stars and at least 10 reviews | 19 |
First up for Berthoud: Mountain Maytag (45.3 miles away, based in Aurora, 4.5 stars from 120 reviews, lists Saturday hours); Mr. Appliance of Northern Colorado (6.8 miles away, based in Loveland, 4.8 stars from 1,832 reviews); Manweiler Appliance (14.0 miles away, based in Windsor, 4.9 stars from 649 reviews, lists Saturday hours); Columbine Appliance & Fireplaces (19.1 miles away, based in Erie, 4.8 stars from 2,693 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Berthoud
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Berthoud
Most washer calls in Berthoud come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Questions to Ask a Berthoud Washer Technician
- Can you give a written estimate before ordering parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Berthoud, CO
Why does my Maytag washer show an error code?
How do I find a technician who knows Maytag washers?
Why does my front-load washer smell?
Is this Maytag customer service?
More Washing Machine Repair in Berthoud, CO
Maytag Washer Repair Near Berthoud
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Berthoud technician bring the right parts.