Most Maytag washer repairs in Beverly Hills involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Beverly Hills, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Beverly Hills CA
Our data shows 40 appliance repair companies inside a 30-mile radius of Beverly Hills. 16 of them are based in Beverly Hills itself, and the rest are spread across West Hollywood (12), Los Angeles (10), and Culver City (2). The farthest listed company is about 4 miles out. Nearest on the list: Wolf Appliance Jeremy Master, around 0.2 miles out. None of the repair companies near Beverly Hills name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 34 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 35 |
|---|---|
| Listing Saturday hours | 48 |
| Mention Maytag | 0 |
| Mention washer work | 25 |
| Three nearest companies, miles away | 0.2, 0.3, 0.4 |
| Appliance repair companies in range (30 mi) | 60 |
First up for Beverly Hills: Vertex Appliance Repair (2.7 miles away, based in West Hollywood, 5.0 stars from 109 reviews, lists Saturday hours); SoCal Appliance Repair Pros (0.5 miles away, 4.9 stars from 263 reviews, lists Saturday hours); Appliance Insight Appliance Repair (3.1 miles away, based in Los Angeles, 5.0 stars from 104 reviews, lists Saturday hours); ASA Appliance Repair (2.5 miles away, based in West Hollywood, 5.0 stars from 173 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
When to Call for Maytag Washer Repair
- Grinding or roaring noise that rises with spin speed
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
Inside a Washer Repair Visit
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Beverly Hills Owners Should Know
City of Beverly Hills Public Works (Water Utility), which supplies Beverly Hills, reports hardness of hard; the city reports an average of roughly 290 mg/L (about 17 grains per gallon). Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: Basic Information About Your Potable Water - City of Beverly Hills
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
Hiring a Washer Repair Company in Beverly Hills
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Beverly Hills, CA
Is this Maytag customer service?
Why does my Maytag washer show an error code?
Which Beverly Hills technicians work on Maytag?
Where is the water under my washer coming from?
Related Repair Pages for Beverly Hills
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.