Most Kenmore washer repairs in Fairfield Glade involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Fairfield Glade, with those that mention Kenmore first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears washer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite washers; they are not Sears.
Independent Kenmore Washer Technicians, Fairfield Glade TN
40 repair companies serve Fairfield Glade from within 60 miles. The rest are spread across Knoxville (15), Crossville (4), and Harriman (3). Distances run up to about 53 miles. Pattersons Home Appliances is the nearest, roughly 9.5 miles from Fairfield Glade. None of the repair companies near Fairfield Glade name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 40 businesses. Because the nearest shops are farther out, ask each company whether Fairfield Glade is inside its regular service area.
Companies are shown by relevance and distance from Fairfield Glade. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 9.5, 9.7, 9.9 |
|---|---|
| Listing Saturday hours | 27 |
| Mention washer work | 18 |
| With 4.5+ stars and at least 10 reviews | 25 |
| Repair companies inside 60 miles | 53 |
| Mention Kenmore | 0 |
Closest matches for Fairfield Glade: Sears Appliance Repair (9.9 miles away, based in Crossville, 4.6 stars from 96 reviews, lists Saturday hours); Pattersons Home Appliances (9.5 miles away, based in Crossville, 4.4 stars from 78 reviews, lists Saturday hours); Sears Appliance Repair (18.2 miles away, based in Harriman, 4.3 stars from 113 reviews, lists Saturday hours); Mr. Appliance of Knoxville (44.8 miles away, based in Knoxville, 4.6 stars from 1,973 reviews).
Kenmore sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Kenmore Washer Lines and Features
How Kenmore Washers Are Built
Sensor-equipped models estimate load size and soil level and adjust water and detergent to match. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
Signs Your Kenmore Washer Needs a Technician
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Care Kenmore Recommends for Its Washers
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
- Check the hoses behind the washer regularly for cracks, bulges or drips, and replace them about every five years. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
What Kenmore Washer Repairs Cost
A Kenmore washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Kenmore Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
What Fairfield Glade Owners Should Know
Most washer calls in Fairfield Glade come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Before You Book in Fairfield Glade
- If the washer is leaking, will you find where the water starts before quoting a part?
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
Kenmore Washer Repair FAQs: Fairfield Glade, TN
Why does my front-load washer smell?
Is my Kenmore washer worth repairing?
Why is my washer leaking?
Related Repair Pages for Fairfield Glade
Kenmore Washer Repair Near Fairfield Glade
Before you call, find the model and serial number on your Kenmore washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.