A Kenmore washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Kenmore and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore washers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears washer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite washers; they are not Sears.
Kenmore Washer Repair Near Jeannette
40 repair companies serve Jeannette from within 30 miles. 2 of them are based in Jeannette itself, and other nearby bases include Pittsburgh (11), Greensburg (2), and Irwin (2). The farthest listed company is about 22 miles out. None of the repair companies near Jeannette name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Don's All Appliance Repair, around 0.1 miles out. The 32 rated companies in range average 3.9 stars.
Companies are shown by relevance and distance from Jeannette. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 30 miles | 60 |
|---|---|
| Listing Saturday hours | 45 |
| Mention Kenmore | 0 |
| Three nearest companies, miles away | 0.1, 1.0, 3.5 |
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Mention washer work | 9 |
At the top of the Jeannette list: NATLAD REPAIR SERVICE LLC (12.7 miles away, based in East Pittsburgh, 4.7 stars from 241 reviews); Sears Appliance Repair (9.1 miles away, based in North Versailles Township, 4.4 stars from 397 reviews, lists Saturday hours); Cabin Hill Appliance & Service (3.5 miles away, based in Greensburg, 4.9 stars from 457 reviews, lists Saturday hours); Liberty Appliance Service (13.5 miles away, based in McKeesport, 4.1 stars from 14 reviews).
Kenmore Washer Lines Technicians Work On
How Kenmore Washers Are Built
Some top load models use an adaptive motor that adjusts its power to each load. Source: Kenmore - Life Your Way Loves Kenmore Top Load Laundry
Kenmore Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Jeannette
Keeping a Kenmore Washer Running
- Every few months, run the empty washer on hot water with two cups of white vinegar to clear detergent residue and grime. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
Kenmore Washer Repair Cost Ranges
Most Kenmore washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Jeannette
Most washer calls in Jeannette come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
In Pennsylvania, you can check a license with the PA Office of Attorney General Home Improvement Contractor Registration Search or report a problem to the Pennsylvania Office of Attorney General.
Questions to Ask a Jeannette Washer Technician
- What guarantee do you give on parts and labor?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Do you work on front-load and top-load washers, or only one type?
Kenmore Washer Repair FAQs: Jeannette, PA
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Which Jeannette technicians work on Kenmore?
Other Washer Repair in Jeannette
More Kenmore Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.