Most Kenmore washer repairs in Glen Rock involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Glen Rock, with those that mention Kenmore first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Glen Rock work on Kenmore washers regularly.
Kenmore Washer Repair Near Glen Rock
We found 40 appliance repair companies within 30 miles of Glen Rock. 2 list an address in Glen Rock, and the rest are spread across Paterson (6), Paramus (6), and Ridgewood (3). Distances run up to about 5 miles. No company within 90 miles of Glen Rock mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Appliance Repair Technologies Glen Rock, around 0.3 miles out. The 31 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Kenmore | 0 |
|---|---|
| Companies within 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 12 |
| Mention washer work | 10 |
| Distance to the three closest (mi) | 0.3, 1.2, 1.3 |
| Open on Saturdays (per listing) | 37 |
Closest matches for Glen Rock: Mr. Appliance of Bergen County (1.4 miles away, based in Ridgewood, 4.6 stars from 317 reviews, lists Saturday hours); Sears Appliance Repair (3.0 miles away, based in Paramus, 4.4 stars from 266 reviews, lists Saturday hours); All Bergen Appliance Service (3.7 miles away, based in Paramus, 4.5 stars from 360 reviews, lists Saturday hours); A&D Appliance Repair (3.1 miles away, based in Prospect Park, 4.2 stars from 696 reviews, lists Saturday hours).
Know Your Kenmore Washer
What a Kenmore Washer Technician Deals With
Select models include Deep Fill or water level control, which raises or lowers the fill level beyond the automatic setting. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
Top load models are built with either a Triple Action Agitator or an agitator-free impeller wash plate, which changes the parts and wash motion a technician works on. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
Signs Your Kenmore Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Keeping a Kenmore Washer Running
- Smart models alert the owner when it is time to run the washer cleaning cycle. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
What Kenmore Washer Repairs Cost
Most Kenmore washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Kenmore Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Glen Rock Owners Should Know
Most washer calls in Glen Rock come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
In New Jersey, you can check a license with the New Jersey Division of Consumer Affairs License Verification System or report a problem to the New Jersey Division of Consumer Affairs.
Before You Book in Glen Rock
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Washer Repair FAQs: Glen Rock, NJ
Which Glen Rock technicians work on Kenmore?
Is this Kenmore customer service?
Why won't my washer spin?
Why does my front-load washer smell?
Other Washer Repair in Glen Rock
More Kenmore Washer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.