Serving International Falls, Minnesota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Kenmore Washer Repair in International Falls, MN

See which technicians around International Falls, MN mention Kenmore, how far away they are and how customers rate them.

Need Kenmore washer repair near International Falls?
Call our helpline to be connected with an independent technician who repairs Kenmore washers.
☎(866) 293-4411
✓6 companies listed for International Falls✓Independent, not a manufacturer✓Public ratings & distances

Most Kenmore washer repairs in International Falls involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The International Falls list starts with companies that name Kenmore, followed by other appliance repair companies that work on washers.

Washing Machine Repair Near Me is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore washers and other brands.

With a Kenmore washer, the model number matters more than the badge: it tells a technician exactly which parts and repair steps apply. Find it on the label before you call.

Who Works on Kenmore Washers Near International Falls

We found 7 appliance repair companies within 103 miles of International Falls. 2 list an address in International Falls, and the rest are spread across Bemidji (2), Virginia (1), and Hibbing (1). The closest is Northland Sales & Service, about 1.0 miles away. No company within 90 miles of International Falls mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.7 stars across 6 businesses. Because the nearest shops are farther out, ask each company whether International Falls is inside its regular service area.

Washer & Dryer Repair
Sears Appliance Repair
1606 MN-11 #71, International Falls, MN 56649
1.4 mi from International Falls
★★★★★ 5.0 (1 review)
Mentions washersSaturday hours
Appliance Repair
Northland Sales & Service
500 3rd St, International Falls, MN 56649
1.0 mi from International Falls
★★★★★ 4.9 (18 reviews)
Washer & Dryer Repair
Sears Appliance Repair
1239 S Pokegama Ave, Grand Rapids, MN 55744
94.8 mi from International Falls
★★★½ 3.7 (6 reviews)
Mentions washersSaturday hours
Appliance Repair
Bud's Appliance Repair
3001 4th Ave E, Hibbing, MN 55746
83.9 mi from International Falls
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Range Repair Service
108 S 15th Ave W, Virginia, MN 55792
83.5 mi from International Falls
Appliance Repair
Home Repair Professionals
2722 Paul Bunyan Dr NW, Bemidji, MN 56601
102.7 mi from International Falls
★★★★★ 5.0 (1 review)

Companies are shown by relevance and distance from International Falls. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

International Falls repair companies in numbers
Companies within 103 miles7
Name washers or washing machines in their listing3
Three nearest companies, miles away1.0, 1.4, 83.5
Mention Kenmore0
Open on Saturdays (per listing)4
With 4.5+ stars and at least 10 reviews2

The leading options for International Falls are Sears Appliance Repair (1.4 miles away, 5.0 stars from 1 reviews, lists Saturday hours); Northland Sales & Service (1.0 miles away, 4.9 stars from 18 reviews); Sears Appliance Repair (94.8 miles away, based in Grand Rapids, 3.7 stars from 6 reviews, lists Saturday hours); Bud's Appliance Repair (83.9 miles away, based in Hibbing, 5.0 stars from 2 reviews, lists Saturday hours).

⚡ Call to reach an independent Kenmore washer tech
☎(866) 293-4411

Kenmore sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

Know Your Kenmore Washer

Accela WashA feature that shortens wash time so more loads can be finished in the same amount of time.
Accela SoakA feature that draws concentrated detergent up from the bottom of the basket to soak the load.

What Makes Kenmore Washer Repairs Different

Select models include Deep Fill or water level control, which raises or lowers the fill level beyond the automatic setting. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide

Top load models are built with either a Triple Action Agitator or an agitator-free impeller wash plate, which changes the parts and wash motion a technician works on. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide

Signs Your Kenmore Washer Needs a Technician

  • Washer will not start or the lid or door stays locked
  • Loud banging, shaking or walking during the spin
  • Burning smell or a motor that hums without turning

What Gets Fixed on a International Falls Washer Call

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Keeping a Kenmore Washer Running

Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.

Budgeting for a Kenmore Washer Repair

Most Kenmore washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What to Have Ready for a Kenmore Washer Call

  • The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
  • Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
  • Where the washer drains (standpipe or laundry sink)

What International Falls Owners Should Know

Most washer calls in International Falls come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

How to Choose a Washing Machine Technician Near International Falls

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Is your company licensed where my state requires it, and insured?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Kenmore Washer Repair FAQs: International Falls, MN

Is my Kenmore washer worth repairing?
Compare the repair quote with the price of a comparable new washer and consider its age. Lid switches, door locks, inlet valves, belts and drain pumps are modest repairs on a washer that is otherwise sound. Our repair-cost guide shows published ranges.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

More Washing Machine Repair in International Falls, MN

More Kenmore Washer Repair Pages Nearby

Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.

One call to a Kenmore washer technician near you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech