Serving Orting, Washington and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

GE Washer Repair in Orting, WA

A local list of independent GE washing machine technicians for Orting and the Pierce County area, plus a helpline that connects you with one.

Talk to a GE washer tech in Orting
Call our helpline to be connected with an independent technician who repairs GE washers.
☎(866) 293-4411
✓10 companies listed for Orting✓Independent, not a manufacturer✓Public ratings & distances

A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Orting, with those that mention GE first, then the nearest appliance repair companies.

Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.

Independent GE Washer Technicians, Orting WA

Our data shows 40 appliance repair companies inside a 30-mile radius of Orting. 2 list an address in Orting, and other nearby bases include Tacoma (8), Federal Way (6), and Auburn (6). The closest is Line Orting Appliance Repair Solutions, about 0.3 miles away. No company within 30 miles of Orting names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 30 rated companies, the average public rating is 4.7 stars.

Mentions GE
GE Monogram Repair Kirkland
11011 120th Ave NE, Kirkland, WA 98033
41.6 mi from Orting
★★★★★ 5.0 (21 reviews)
Saturday hours
Washer & Dryer Repair
RPS Appliance Repair
10102 224th St E #45, Graham, WA 98338
5.0 mi from Orting
★★★★★ 4.9 (495 reviews)
Mentions washers
Washer & Dryer Repair
HotWire Furnace, Air Conditioning & Appliance Repair Tacoma
5054 39th St NE, Tacoma, WA 98422
15.6 mi from Orting
★★★★★ 4.9 (470 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
17911 Pacific Ave S, Spanaway, WA 98387
10.5 mi from Orting
★★★★½ 4.5 (111 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
3500 S Meridian Ste 900, Puyallup, WA 98373
5.9 mi from Orting
★★★★½ 4.5 (317 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Leon's Luxury repair & installation
1227 E 63rd St, Tacoma, WA 98404
11.8 mi from Orting
★★★★½ 4.7 (51 reviews)
Mentions washers
Washer & Dryer Repair
A&H Appliance and Home services
1313 SW 348th St, Federal Way, WA 98023
14.9 mi from Orting
★★★★★ 4.9 (35 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Tacoma
8001 E McKinley Ave, Tacoma, WA 98404
11.6 mi from Orting
★★★★ 4.1 (112 reviews)
Mentions washers
Washer & Dryer Repair
FIX UFA Appliance Repair
1215 117th St S, Tacoma, WA 98444
11.9 mi from Orting
★★★★½ 4.5 (76 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Service Solutions LLC
33530 1st Way S, Federal Way, WA 98003
15.1 mi from Orting
★★★★★ 5.0 (14 reviews)
Mentions washers

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Orting repair companies in numbers
With 4.5+ stars and at least 10 reviews21
Mention GE0
Three nearest companies, miles away0.3, 0.4, 3.9
Open on Saturdays (per listing)36
Repair companies inside 30 miles60
Name washers or washing machines in their listing13

At the top of the Orting list: GE Monogram Repair Kirkland (41.6 miles away, based in Kirkland, 5.0 stars from 21 reviews, lists Saturday hours); RPS Appliance Repair (5.0 miles away, based in Graham, 4.9 stars from 495 reviews); HotWire Furnace, Air Conditioning & Appliance Repair Tacoma (15.6 miles away, based in Tacoma, 4.9 stars from 470 reviews, lists Saturday hours); Sears Appliance Repair (10.5 miles away, based in Spanaway, 4.5 stars from 111 reviews, lists Saturday hours).

⚡ Get connected with a GE washer technician near Orting
☎(866) 293-4411

Know Your GE Washer

GE Profile top load seriesGE Profile top load washers offered in both agitator and impeller versions with adaptive Smarter Wash controls.
UltraFresh Vent System with OdorBlockA front load design that drains the gasket and spins the drum with the door closed to pull air through a vent and dry the tub after washing.

What a GE Washer Technician Deals With

The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting

GE Washer Symptoms and First Checks

  • Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
  • Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water

What GE Washer Codes Mean

CodeWhat it means
UEThe load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator
dE / E2The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator
H2O SUPPLY / IEWater is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator

When to Call for GE Washer Repair

  • Washer will not start or the lid or door stays locked
  • Grinding or roaring noise that rises with spin speed
  • An error code on the display

How a Washer Service Call Usually Goes in Orting

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Care GE Recommends for Its Washers

Brand guides: GE Washer Not Draining or Spinning: What to Check.

GE Washer Repair Cost Ranges

Price the repair before replacing a GE washer. Published ranges for common jobs:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Getting Ready for the Repair

  • Where the washer drains (standpipe or laundry sink)
  • What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
  • The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet

Local Notes for Orting

Most washer calls in Orting come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Questions to Ask a Orting Washer Technician

  • Do you work on front-load and top-load washers, or only one type?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • If the washer is leaking, will you find where the water starts before quoting a part?

GE Washer Repair FAQs: Orting, WA

Why does my GE washer show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged drain filter, a kinked hose or an unbalanced load. If the code returns, a technician can test the part the code points to.
Is this GE customer service?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Other Washer Repair in Orting

GE Washer Repair Near Orting

Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.

One call to a GE washer technician near you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech