Most GE washer repairs in Lynnwood involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Lynnwood list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Independent GE Washer Technicians, Lynnwood WA
We found 40 appliance repair companies within 30 miles of Lynnwood. 7 list an address in Lynnwood, and other nearby bases include Bothell (6), Everett (6), and Edmonds (5). Rapid Appliance Repair Service is the nearest, roughly 1.2 miles from Lynnwood. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Across 31 rated companies, the average public rating is 4.8 stars.
Companies are shown by relevance and distance from Lynnwood. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention GE | 0 |
|---|---|
| Name washers or washing machines in their listing | 14 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Open on Saturdays (per listing) | 42 |
| Distance to the three closest (mi) | 1.2, 1.2, 1.4 |
| Repair companies inside 30 miles | 60 |
At the top of the Lynnwood list: GE Monogram Repair Kirkland (10.6 miles away, based in Kirkland, 5.0 stars from 21 reviews, lists Saturday hours); HotWire Furnace, Air Conditioning & Appliance Repair Bothell (3.2 miles away, based in Bothell, 4.9 stars from 1,493 reviews, lists Saturday hours); Ace Appliance Service (4.3 miles away, based in Everett, 5.0 stars from 322 reviews); Appliance Fixers (4.5 miles away, based in Bothell, 4.9 stars from 270 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
How GE Washers Are Built
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
GE Washer Problems Worth a Service Call
- An error code on the display
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
What Gets Fixed on a Lynnwood Washer Call
Care GE Recommends for Its Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Lynnwood
Most washer calls in Lynnwood come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Lynnwood
- What is the service call or diagnostic fee, and is it applied to the repair?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
GE Washer Repair FAQs: Lynnwood, WA
Is this GE customer service?
Why is my washer leaking?
Why does my GE washer show an error code?
More Washing Machine Repair in Lynnwood, WA
GE Washer Repair Near Lynnwood
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.