If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Snyder list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Snyder
Within 71 miles of Snyder there are 9 appliance repair companies in our data. The rest are spread across Abilene (6), Sweetwater (2), and Big Spring (1). Nearest on the list: Wes-Tex Appliance Services, around 32.2 miles out. No company within 90 miles of Snyder mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 8 rated companies, the average public rating is 4.8 stars. Because the nearest shops are farther out, ask each company whether Snyder is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Listing Saturday hours | 5 |
|---|---|
| Appliance repair companies in range (71 mi) | 9 |
| Mention GE | 0 |
| Three nearest companies, miles away | 32.2, 34.0, 45.0 |
| With 4.5+ stars and at least 10 reviews | 6 |
| Name washers or washing machines in their listing | 4 |
Closest matches for Snyder: Sears Appliance Repair (45.0 miles away, based in Big Spring, 4.6 stars from 11 reviews, lists Saturday hours); Sears Appliance Repair (34.0 miles away, based in Sweetwater, 4.4 stars from 25 reviews, lists Saturday hours); Abilene Appliance Repairs (70.3 miles away, based in Abilene, 4.9 stars from 22 reviews); Wes-Tex Appliance Services (32.2 miles away, based in Sweetwater, 4.9 stars from 9 reviews).
GE Washer Lines Technicians Work On
What a GE Washer Technician Deals With
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Error Codes
| Code | What it means |
|---|---|
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
What a Washing Machine Technician Checks
Keeping a GE Washer Running
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Snyder
Most washer calls in Snyder come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Snyder
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Snyder, TX
Which Snyder technicians work on GE?
Why won't my washer spin?
Why is my washer leaking?
Is my GE washer worth repairing?
Other Washer Repair in Snyder
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.