A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Red Oak list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Red Oak TX
Our data shows 40 appliance repair companies inside a 30-mile radius of Red Oak. 1 list an address in Red Oak, and other nearby bases include Dallas (22), Midlothian (3), and Cedar Hill (3). Reed's Appliance Repairs is the nearest, roughly 6.1 miles from Red Oak. None of the repair companies near Red Oak name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 29 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 45 |
|---|---|
| Mention GE | 0 |
| Three nearest companies, miles away | 6.1, 6.6, 7.9 |
| Companies within 30 miles | 60 |
| Name washers or washing machines in their listing | 10 |
| Rated 4.5 stars or higher (10+ reviews) | 21 |
The leading options for Red Oak are Mr. Appliance of Mansfield (11.5 miles away, based in Midlothian, 4.6 stars from 532 reviews, lists Saturday hours); Sears Appliance Repair (8.3 miles away, based in Waxahachie, 4.6 stars from 213 reviews, lists Saturday hours); Reed's Appliance Repairs (6.1 miles away, 4.7 stars from 115 reviews); Best Thermador repair service (10.4 miles away, based in Dallas, 4.8 stars from 18 reviews, lists Saturday hours).
GE Washer Lines and Features
What a GE Washer Technician Deals With
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Symptoms and First Checks
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Water left in the drum after the cycle
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Keeping a GE Washer Running
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Local Notes for Red Oak
Most washer calls in Red Oak come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Red Oak
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair GE washers, and how quickly can you get parts?
- Can you give a written estimate before ordering parts?
GE Washer Repair FAQs: Red Oak, TX
What should I do about a GE error code?
Why does my front-load washer smell?
Which Red Oak technicians work on GE?
Other Washer Repair in Red Oak
More GE Washer Repair Pages Nearby
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Red Oak technician bring the right parts.