If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Mission Bend list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Mission Bend
40 repair companies serve Mission Bend from within 30 miles. The rest are spread across Houston (17), Sugar Land (12), and Richmond (6). Nearest on the list: Houston Appliance Repair Masters, around 1.5 miles out. None of the repair companies near Mission Bend name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.6 stars across 34 businesses.
Companies are shown by relevance and distance from Mission Bend. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention GE | 0 |
|---|---|
| Distance to the three closest (mi) | 1.5, 1.5, 2.6 |
| Listing Saturday hours | 48 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention washer work | 15 |
| Rated 4.5 stars or higher (10+ reviews) | 25 |
Closest matches for Mission Bend: Leader Appliance Repair (4.1 miles away, based in Richmond, 4.9 stars from 985 reviews, lists Saturday hours); All Pro Repair TX: Appliance repair company (7.1 miles away, based in Katy, 5.0 stars from 65 reviews, lists Saturday hours); Larry's Appliance Service (2.9 miles away, based in Houston, 5.0 stars from 18 reviews); Katy TV And Appliance Service (5.1 miles away, based in Katy, 4.5 stars from 49 reviews, lists Saturday hours).
GE Washer Lines and Features
How GE Washers Are Built
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Symptoms and First Checks
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- An error code on the display
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Mission Bend
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Mission Bend
Most washer calls in Mission Bend come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Mission Bend Washer Technician
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Mission Bend, TX
What stops a washer from spinning?
Should I repair or replace my GE washer?
How do I find a technician who knows GE washers?
Is this GE customer service?
Other Washer Repair in Mission Bend
GE Washer Repair Near Mission Bend
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.