If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Kenedy, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Kenedy TX
Our data shows 40 appliance repair companies inside a 60-mile radius of Kenedy. Other nearby bases include San Antonio (8), Seguin (6), and Converse (6). The closest is Sears Appliance Repair, about 27.8 miles away. No company within 90 miles of Kenedy mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 34 rated companies in range average 4.5 stars. Because the nearest shops are farther out, ask each company whether Kenedy is inside its regular service area.
Companies are shown by relevance and distance from Kenedy. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 7 |
|---|---|
| Open on Saturdays (per listing) | 35 |
| Distance to the three closest (mi) | 27.8, 28.1, 30.3 |
| Mention GE | 0 |
| Repair companies inside 60 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
At the top of the Kenedy list: Sears Appliance Repair (27.8 miles away, based in Floresville, 4.5 stars from 167 reviews, lists Saturday hours); Sears Appliance Repair (28.1 miles away, based in Beeville, 4.2 stars from 88 reviews, lists Saturday hours); Sears Appliance Repair (54.6 miles away, based in Seguin, 4.5 stars from 200 reviews, lists Saturday hours); Pleasanton Appliance Repair. (39.4 miles away, based in Pleasanton, 3.2 stars from 19 reviews, lists Saturday hours).
GE Washer Lines Technicians Work On
How GE Washers Are Built
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- An error code on the display
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Kenedy
Care GE Recommends for Its Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Kenedy, TX
Most washer calls in Kenedy come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Kenedy
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
GE Washer Repair FAQs: Kenedy, TX
Do you work for GE?
Should I repair or replace my GE washer?
Why won't my washer spin?
Why does my GE washer show an error code?
Other Washer Repair in Kenedy
More GE Washer Repair Pages Nearby
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Kenedy technician bring the right parts.