A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Mathis list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Mathis TX
26 repair companies serve Mathis from within 60 miles. Other nearby bases include Corpus Christi (11), Beeville (3), and Rockport (3). The farthest listed company is about 49 miles out. No company within 90 miles of Mathis mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Lopez Appliance Repair is the nearest, roughly 20.1 miles from Mathis. Across 23 rated companies, the average public rating is 4.0 stars. Because the nearest shops are farther out, ask each company whether Mathis is inside its regular service area.
Companies are shown by relevance and distance from Mathis. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 7 |
|---|---|
| Mention washer work | 8 |
| Mention GE | 0 |
| Listing Saturday hours | 15 |
| Three nearest companies, miles away | 20.1, 20.5, 21.2 |
| Repair companies inside 60 miles | 26 |
Closest matches for Mathis: Star appliance repair (34.0 miles away, based in Corpus Christi, 4.9 stars from 1,554 reviews, lists Saturday hours); Sears Appliance Repair (23.0 miles away, based in Beeville, 4.2 stars from 88 reviews, lists Saturday hours); American Appliance Repair (36.4 miles away, based in Corpus Christi, 4.7 stars from 208 reviews, lists Saturday hours); BNR Contractor Services/ Appliance repair (38.5 miles away, based in Corpus Christi, 4.9 stars from 29 reviews).
GE Washer Lines Technicians Work On
How GE Washers Are Built
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- An error code on the display
- Water on the floor under or in front of the washer
What Gets Fixed on a Mathis Washer Call
Keeping a GE Washer Running
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Mathis
Most washer calls in Mathis come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Mathis
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Mathis, TX
Which Mathis technicians work on GE?
Why is my washer leaking?
Do you work for GE?
What should I do about a GE error code?
Other Washer Repair in Mathis
More GE Washer Repair Pages Nearby
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Mathis technician bring the right parts.