Most GE washer repairs in Hurst involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Hurst list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Who Works on GE Washers Near Hurst
Within 30 miles of Hurst there are 40 appliance repair companies in our data. 5 list an address in Hurst, and the rest are spread across Fort Worth (8), Arlington (7), and Southlake (4). The farthest listed company is about 8 miles out. Appliance Recovery is the nearest, roughly 0.2 miles from Hurst. No company within 90 miles of Hurst mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 32 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 0.2, 0.8, 0.8 |
|---|---|
| Name washers or washing machines in their listing | 15 |
| Listing Saturday hours | 42 |
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 23 |
| Mention GE | 0 |
First up for Hurst: Ace Refrigeration and Appliance Repair (6.3 miles away, based in Keller, 4.9 stars from 1,857 reviews); Guinco Service Appliance Repair (3.0 miles away, based in Richland Hills, 4.7 stars from 2,159 reviews); ProStar Appliance LLC (6.1 miles away, based in Euless, 4.8 stars from 214 reviews, lists Saturday hours); Solution Appliance Repair (7.9 miles away, based in Southlake, 5.0 stars from 62 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
How GE Washers Are Built
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
GE Washer Error Codes
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- An error code on the display
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
Inside a Washer Repair Visit
Care GE Recommends for Its Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Hurst Owners Should Know
Most washer calls in Hurst come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Hurst Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
GE Washer Repair FAQs: Hurst, TX
What should I do about a GE error code?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
More Washing Machine Repair in Hurst, TX
GE Washer Repair Near Hurst
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.